From: Patrick Cruce [pcruce@igpp.ucla.edu] Sent: Thursday, March 24, 2011 12:48 PM To: Lydia Philpott Cc: David King Subject: greenland gmag tasks Hi Lydia, I'm supposed to turn tasks 2070c2,c3 & c5 over to you. c3 is done. For c5 you should extend the gmag crib and testscript to exercise the keywords that select particular groups of groundstations. These are keywords: ; /thm_sites = Set this keyword to load magnetometer from the THEMIS GBO network ; ; /tgo_sites = Set this keyword to load magnetometers from the TGO magnetometer network(Courtesy of DTU, Norway) ; ; /dtu_sites = Set this keyword to load magnetometers from the DTU magnetometer network ; ; /ua_sites = Set this keyword to load magnetometers from the University of Alaska magnetometer network. ; ; /maccs_sites = Set this keyword to load magnetometers from the MACCS network. c2 will be a little trickier. Basically, we used to get gmag data from a provider called DMI. Later their project was moved to DTU. It turns out that the older DMI data was essentially uncalibrated. We need a warning when people load these data to tell them this. When you get to this point, let me know, and I'll forward the emails from our point of contact at DTU which describes the issues in more detail. What you probably need to do is #1 add a message to thm_load_gmag that warns the user when they load any of the offending data, #2 add a warning to the users guide, #3 We should discuss adding a warning to the CDFs at the software meeting as well. pat