This page was created by the IDL library routine
mk_html_help2.
Last modified: Wed Jun 12 10:49:46 2024.
PROCEDURE:
mvn_swe_kp5
PURPOSE:
Calculates SWEA key parameters. The result is stored in tplot variables,
and as a save file.
WARNING: This routine is for use by the SWEA instrument team only.
AUTHOR:
David L. Mitchell
CALLING SEQUENCE:
mvn_swe_kp5
INPUTS:
None: Uses data currently loaded into the SWEA common block.
KEYWORDS:
TRANGE: Process data in this time range.
PANS: Named variable to return tplot variables created.
MOM: Calculate density using a moment. This is the default and
only option for now.
DDD: Calculate density from 3D distributions (allows bin
masking). Default is to use SPEC data. This option fits
a Maxwell-Boltzmann distribution to the core and performs
a moment calculation for the halo. This provides corrections
for both spacecraft potential and scattered photoelectrons.
(Currently disabled.)
ABINS: Anode bin mask - 16-element byte array (0 = off, 1 = on)
Default = replicate(1B, 16).
DBINS: Deflector bin mask - 6-element byte array (0 = off, 1 = on)
Default = replicate(1B, 6).
OBINS: Solid angle bin mask - 96-element byte array (0 = off, 1 = on)
Default = reform(ABINS # DBINS, 96).
MASK_SC: Mask PA bins that are blocked by the spacecraft. This is in
addition to any masking specified by ABINS, DBINS, and OBINS.
Default = 1 (yes).
L2ONLY: Only process data using L2 MAG data.
QLEVEL: Minimum quality level for calculations. Filters out the vast
majority of spectra affected by the sporadic low energy
anomaly below 28 eV. The validity levels are:
0B = Data are affected by the low-energy anomaly. There
are significant systematic errors below 28 eV.
1B = Unknown because: (1) the variability is too large to
confidently identify anomalous spectra, as in the
sheath, or (2) secondary electrons mask the anomaly,
as in the sheath just downstream of the bow shock.
2B = Data are not affected by the low-energy anomaly.
Caveat: There is increased noise around 23 eV, even
for "good" spectra.
Default for this procedure is 1B.
OUTPUT_PATH: An output_path for testing, the save file will be put into
OUTPUT_PATH/yyyy/mm/. Directories are created as needed.
Default = root_data_dir() + 'maven/data/sci/swe/kp'.
OUTPUTS:
$LastChangedBy: dmitchell $
$LastChangedDate: 2023-08-21 10:46:02 -0700 (Mon, 21 Aug 2023) $
$LastChangedRevision: 32045 $
$URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/tags/spedas_6_1/projects/maven/swea/Test/mvn_swe_kp5.pro $
(See projects/maven/swea/Test/mvn_swe_kp5.pro)
NAME:
mvn_swe_l2gen5
PURPOSE:
Loads L0 data, creates L2 files for 1 day
WARNING: This routine is for use by the SWEA instrument team only.
CALLING SEQUENCE:
mvn_swe_l2gen5, date=date
INPUT:
None.
KEYWORDS:
DATE: If set, the input date. The default is today.
DIRECTORY: If set, output into this directory, for testing
purposes, don't forget a slash '/' at the end.
L2ONLY: If set, only generate PAD L2 data if MAG L2 data are available.
NOL2: If set, do not generate SWEA L2 data. Takes precedence over the
next three keywords.
DOSPEC: Process the SPEC data. Default = 1 (yes).
DOPAD: Process the PAD data. Default = 1 (yes).
DO3D: Process the 3D data. Default = 1 (yes).
DOKP: Process the KP data. Default = 1 (yes).
ABINS: Anode bin mask -> 16 elements (0 = off, 1 = on)
Default = replicate(1,16)
DBINS: Deflector bin mask -> 6 elements (0 = off, 1 = on)
Default = replicate(1,6)
OBINS: 3D solid angle bin mask -> 96 elements (0 = off, 1 = on)
Default = reform(ABINS # DBINS)
MASK_SC: Mask the spacecraft blockage. This is in addition to any
masking defined by the ABINS, DBINS, and OBINS.
Default = 1 (yes). Set this to 0 to disable and use the
above 3 keywords only (not recommended!).
KP_QLEV: Minimum quality level for calculating key parameters. Filters out
the vast majority of spectra affected by the sporadic low energy
anomaly below 28 eV. The validity levels are:
0B = Data are affected by the low-energy anomaly. There
are significant systematic errors below 28 eV.
1B = Unknown because: (1) the variability is too large to
confidently identify anomalous spectra, as in the
sheath, or (2) secondary electrons mask the anomaly,
as in the sheath just downstream of the bow shock.
2B = Data are not affected by the low-energy anomaly.
Caveat: There is increased noise around 23 eV, even
for "good" spectra.
Default for this procedure is 1B.
HISTORY:
Hacked from Matt F's crib_l0_to_l2.txt, 2014-11-14: jmm
Better memory management and added keywords to control processing: dlm
Development code for data version 5; DLM: 2023-08
$LastChangedBy: dmitchell $
$LastChangedDate: 2023-08-22 12:48:17 -0700 (Tue, 22 Aug 2023) $
$LastChangedRevision: 32051 $
$URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/tags/spedas_6_1/projects/maven/swea/Test/mvn_swe_l2gen5.pro $
(See projects/maven/swea/Test/mvn_swe_l2gen5.pro)
PROCEDURE: mvn_swe_load_l2a
PURPOSE:
Reads in MAVEN Level 2 telemetry files (CDF format). Data are stored in
a common block (mvn_swe_com).
WARNING: This routine is for use by the SWEA instrument team only.
SWEA data structures are:
3D Distributions: mvn_swe_3d
PAD Distributions: mvn_swe_pad
ENGY Spectra: mvn_swe_engy
USAGE:
mvn_swe_load_l2, trange
INPUTS:
trange: Load SWEA packets from L2 data spanning this time range.
(Reads multiple L2 files, if necessary.) This input is
not needed if you first call timespan.
KEYWORDS:
FILENAME: Full path and file name for loading data. Can be multiple
files. Takes precedence over trange, ORBIT, and LATEST.
ORBIT: Load SWEA data by orbit number or range of orbit numbers
(trange and LATEST are ignored). Orbits are numbered using
the NAIF convention, where the orbit number increments at
periapsis. Data are loaded from the apoapsis preceding the
first orbit (periapsis) number to the apoapsis following the
last orbit number.
LATEST: Ignore trange (if present), and load all data within the
LATEST days leading up to the current date.
SPEC: Load SPEC data.
PAD: Load PAD data.
DDD: Load 3D data.
ALL: Load SPEC, PAD, and 3D data.
BURST: Load burst data. (Default is to load survey data.)
ARCHIVE: Synonym for BURST. (For backward compatibility.)
STATUS: Report statistics of data actually loaded.
SUMPLOT: Create a summary plot of the loaded data.
LOADONLY: Download data but do not process.
NOERASE: Do not clear the common block before loading. This
allows multiple calls to load subsets of the data.
SPICEINIT: Force an initialization of SPICE. Use with caution!
Best practice is to initialize SPICE before calling
this routine (or any other data loader).
NOSPICE: Do not initialize SPICE.
$LastChangedBy: dmitchell $
$LastChangedDate: 2023-08-21 10:46:02 -0700 (Mon, 21 Aug 2023) $
$LastChangedRevision: 32045 $
$URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/tags/spedas_6_1/projects/maven/swea/Test/mvn_swe_load_l2a.pro $
CREATED BY: David L. Mitchell 02-02-15
FILE: mvn_swe_load_l2a.pro
(See projects/maven/swea/Test/mvn_swe_load_l2a.pro)
NAME:
MVN_SWE_MAKECDF_3D5
SYNTAX:
MVN_SWEA_MAKECDF_3D5, DATA, FILE = FILE, VERSION = VERSION
PURPOSE:
Routine to produce CDF file from SWEA 3D data structures
WARNING: This routine is for use by the SWEA instrument team only.
INPUTS:
DATA: Structure with which to populate the CDF file
(nominally created by mvn_swe_get3d.pro)
OUTPUT:
CDF file
KEYWORDS:
FILE: full file name of the output file - only used for testing
if not specified (usually won't be), the program creates the appropriate filename
VERSION: integer; software version
- read from common block (SWE_CFG) defined in mvn_swe_calib.pro
- keyword no longer needed (but kept for compatibility)
HISTORY:
Created by Matt Fillingim (with code stolen from JH and RL)
Added directory keyword, and deletion of old files, jmm, 2014-11-14
Read version number from common block; MOF: 2015-01-30
ISTP compliance scrub; DLM: 2016-04-08
Development code for data version 5; DLM: 2023-08
VERSION:
$LastChangedBy: dmitchell $
$LastChangedDate: 2023-11-28 07:30:31 -0800 (Tue, 28 Nov 2023) $
$LastChangedRevision: 32258 $
$URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/tags/spedas_6_1/projects/maven/swea/Test/mvn_swe_makecdf_3d5.pro $
(See projects/maven/swea/Test/mvn_swe_makecdf_3d5.pro)
NAME:
MVN_SWE_MAKECDF_PAD5
SYNTAX:
MVN_SWEA_MAKECDF_PAD5, DATA, FILE = FILE, VERSION = VERSION
PURPOSE:
Routine to produce CDF file from SWEA pad data structures
WARNING: This routine is for use by the SWEA instrument team only.
INPUT:
DATA: Structure with which to populate the CDF file
(nominally created by mvn_swe_getpad.pro)
OUTPUT:
CDF file
KEYWORDS:
FILE: full file name of the output file - only used for testing
if not specified (usually won't be), the program creates the appropriate filename
VERSION: integer; software version
- read from common block (SWE_CFG) defined in mvn_swe_calib.pro
- keyword no longer needed (but kept for compatibility)
L2_ONLY: only create cdf if L2 MAG data are available.
HISTORY:
Created by Matt Fillingim (with code stolen from JH and RL)
Added directory keyword, jmm, 2104-11-14
Read version number from common block; MOF: 2015-01-30
ISTP compliance scrub; DLM: 2016-04-08
Development code for data version 5; DLM: 2023-08
VERSION:
$LastChangedBy: dmitchell $
$LastChangedDate: 2023-11-28 07:30:31 -0800 (Tue, 28 Nov 2023) $
$LastChangedRevision: 32258 $
$URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/tags/spedas_6_1/projects/maven/swea/Test/mvn_swe_makecdf_pad5.pro $
(See projects/maven/swea/Test/mvn_swe_makecdf_pad5.pro)
NAME:
MVN_SWE_MAKECDF_SPEC5
SYNTAX:
MVN_SWE_MAKECDF_SPEC5, DATA, FILE = FILE, VERSION = VERSION
PURPOSE:
Routine to produce CDF file from SWEA spec data structures.
WARNING: This routine is for use by the SWEA instrument team only.
INPUT:
DATA: Structure with which to populate the CDF file
(nominally created by mvn_swe_getspec.pro)
OUTPUT:
CDF file
KEYWORDS:
FILE: full name of the output file - only used for testing
if not specified (usually won't be), the program creates the appropriate filename
VERSION: integer; software version
- read from common block (SWE_CFG) defined in mvn_swe_calib.pro
- keyword no longer need (but kept for compatibility)
HISTORY:
created by Matt Fillingim (with code stolen from JH and RL)
Added directory keyword, and deletion of old files, jmm, 2014-11-14
Read version number from common block; MOF: 2015-01-30
ISTP compliance scrub; DLM: 2016-04-08
Development code for data version 5; DLM: 2023-08
VERSION:
$LastChangedBy: dmitchell $
$LastChangedDate: 2023-11-28 07:30:31 -0800 (Tue, 28 Nov 2023) $
$LastChangedRevision: 32258 $
$URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/tags/spedas_6_1/projects/maven/swea/Test/mvn_swe_makecdf_spec5.pro $
(See projects/maven/swea/Test/mvn_swe_makecdf_spec5.pro)
NAME:
MVN_SWE_READCDF_3D5
SYNTAX:
MVN_SWE_READCDF_3D5, INFILE, STRUCTURE
PURPOSE:
Routine to read CDF file from mvn_swe_makecdf_3d.pro
WARNING: This routine is for use by the SWEA instrument team only.
INPUTS:
INFILE: CDF file name to read
(nominally created by mvn_swe_makecdf_3d.pro)
OUTPUT:
STRUCTURE: IDL data structure
KEYWORDS:
OUTFILE: Output file name
HISTORY:
Created by Matt Fillingim
VERSION:
$LastChangedBy: dmitchell $
$LastChangedDate: 2023-08-22 12:48:17 -0700 (Tue, 22 Aug 2023) $
$LastChangedRevision: 32051 $
$URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/tags/spedas_6_1/projects/maven/swea/Test/mvn_swe_readcdf_3d5.pro $
(See projects/maven/swea/Test/mvn_swe_readcdf_3d5.pro)
NAME:
MVN_SWE_READCDF_PAD5
SYNTAX:
MVN_SWE_READCDF_PAD5, INFILE, STRUCTURE
PURPOSE:
Routine to read CDF file from mvn_swe_makecdf_pad.pro
WARNING: This routine is for use by the SWEA instrument team only.
INPUTS:
INFILE: CDF file name to read
(nominally created by mvn_swe_makecdf_pad.pro)
OUTPUT:
STRUCTURE: IDL data structure
KEYWORDS:
OUTFILE: Output file name
HISTORY:
Created by Matt Fillingim
VERSION:
$LastChangedBy: dmitchell $
$LastChangedDate: 2023-08-22 12:48:17 -0700 (Tue, 22 Aug 2023) $
$LastChangedRevision: 32051 $
$URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/tags/spedas_6_1/projects/maven/swea/Test/mvn_swe_readcdf_pad5.pro $
(See projects/maven/swea/Test/mvn_swe_readcdf_pad5.pro)
NAME:
MVN_SWE_READCDF_SPEC5
SYNTAX:
MVN_SWE_READCDF_SPEC5, INFILE, STRUCTURE
PURPOSE:
Routine to read CDF file from mvn_swe_makecdf_spec.pro
WARNING: This routine is for use by the SWEA instrument team only.
INPUTS:
INFILE: CDF file name to read
(nominally created by mvn_swe_makecdf_spec.pro)
OUTPUT:
STRUCTURE: IDL data structure
KEYWORDS:
OUTFILE: Output file name
HISTORY:
Created by Matt Fillingim
Development code for data version 5; DLM: 2023-08
VERSION:
$LastChangedBy: dmitchell $
$LastChangedDate: 2023-08-22 12:48:17 -0700 (Tue, 22 Aug 2023) $
$LastChangedRevision: 32051 $
$URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/tags/spedas_6_1/projects/maven/swea/Test/mvn_swe_readcdf_spec5.pro $
(See projects/maven/swea/Test/mvn_swe_readcdf_spec5.pro)