This page was created by the IDL library routine
mk_html_help2.
Last modified: Wed Jun 12 10:49:46 2024.
PROCEDURE: IUG_CRIB_ASI_NIPR
A sample crib sheet that explains how to use the "iug_load_asi_nipr"
procedure. You can run this crib sheet by copying & pasting each
command below (except for stop and end) into the IDL command line.
Or alternatively compile and run using the command:
.run iug_crib_asi_nipr
NOTE: See the rules of the road.
For more information, see:
http://scidbase.nipr.ac.jp/modules/metadata/index.php?content_id=103
& http://scidbase.nipr.ac.jp/modules/metadata/index.php?content_id=115
Written by: Y.-M. Tanaka, May 2, 2011
National Institute of Polar Research, Japan.
ytanaka at nipr.ac.jp
(See projects/iugonet/examples/iug_crib_asi_nipr.pro)
PROCEDURE: IUG_CRIB_ASK_NIPR
A sample crib sheet that explains how to use the "iug_load_ask_nipr"
procedure. You can run this crib sheet by copying & pasting each
command below (except for stop and end) into the IDL command line.
Or alternatively compile and run using the command:
.run iug_crib_ask_nipr
NOTE: See the rules of the road.
For more information, see:
http://scidbase.nipr.ac.jp/modules/metadata/index.php?content_id=101
& http://scidbase.nipr.ac.jp/modules/metadata/index.php?content_id=114
& http://scidbase.nipr.ac.jp/modules/metadata/index.php?content_id=115
& http://scidbase.nipr.ac.jp/modules/metadata/index.php?content_id=224
Written by: Y.-M. Tanaka, October 10, 2014
National Institute of Polar Research, Japan.
ytanaka at nipr.ac.jp
(See projects/iugonet/examples/iug_crib_ask_nipr.pro)
PROCEDURE: IUG_CRIB_AVON_VLFB
A crib sheet to demonstrate how to deal with data from
AVON(Asia VLF Observation Network) VLF-B data using udas.
You can run this crib sheet by copying&pasting each command
below into the IDL command line.
Or alternatively compile and run using the command:
.run iug_crib_avon_vlfb
Written by: M. Yagi, May 14, 2014
Last Update: M. Yagi, Jun 26, 2014
(See projects/iugonet/examples/iug_crib_avon_vlfb.pro)
PROCEDURE: IUG_CRIB_AWS_RISH.PRO
A sample crib sheet that explains how to use the "iug_load_aws_rish.pro"
procedure. You can run this crib sheet by copying & pasting each
command below (except for stop and end) into the IDL command line.
Or alternatively compile and run using the command:
.run iug_crib_aws_rish
Written by: A. Shinbori, Nov 12, 2012
Last Updated: A. Shinbori, Feb 25, 2013
(See projects/iugonet/examples/iug_crib_aws_rish.pro)
PROCEDURE: IUG_CRIB_BLR_RISH.PRO
A sample crib sheet that explains how to use the "iug_load_blr_rish.pro"
procedure. You can run this crib sheet by copying & pasting each
command below (except for stop and end) into the IDL command line.
Or alternatively compile and run using the command:
.run iug_crib_blr_rish
Written by: A. Shinbori, Feb 18, 2011
Last Updated: A. Shinbori, Dec 26, 2011
(See projects/iugonet/examples/iug_crib_blr_rish.pro)
PROCEDURE: IUG_CRIB_EAR.PRO
A sample crib sheet that explains how to use the "iug_load_ear.pro"
procedure. You can run this crib sheet by copying & pasting each
command below (except for stop and end) into the IDL command line.
Or alternatively compile and run using the command:
.run iug_crib_ear
Written by: A. Shinbori, Feb 18, 2011
Last Updated: A. Shinbori, Decq 02, 2011
(See projects/iugonet/examples/iug_crib_ear.pro)
PROCEDURE: IUG_CRIB_EISCAT
A sample crib sheet that explains how to use the "iug_load_eiscat"
procedure. You can run this crib sheet by copying & pasting each
command below (except for stop and end) into the IDL command line.
Or alternatively compile and run using the command:
.run iug_crib_eiscat
NOTE: See the rules of the road.
For more information, see:
http://polaris.nipr.ac.jp/~eiscat/eiscatdata/
Written by: Y.-M. Tanaka, July 26, 2011
National Institute of Polar Research, Japan.
ytanaka at nipr.ac.jp
Modified by: Y.-M. Tanaka, December 1, 2011
(See projects/iugonet/examples/iug_crib_eiscat.pro)
PROCEDURE: IUG_CRIB_EISCAT_VIEF
A sample crib sheet that explains how to use the "iug_load_eiscat_vief"
procedure. You can run this crib sheet by copying & pasting each
command below (except for stop and end) into the IDL command line.
Or alternatively compile and run using the command:
.run iug_crib_eiscat_vief
NOTE: See the rules of the road.
For more information, see:
http://polaris.nipr.ac.jp/~eiscat/eiscatdata/
Written by: Y.-M. Tanaka, August 16, 2013
National Institute of Polar Research, Japan.
ytanaka at nipr.ac.jp
(See projects/iugonet/examples/iug_crib_eiscat_vief.pro)
PROGRAM: iug_crib_gmag_icswse
This is an example crib sheet that will load the MAGDAS magnetometer data
released by International Center for Space Weather Science and Education(ICSWSE)
, Kyushu University, Japan.
Open this file in a text editor and then use copy and paste to copy
selected lines into an idl window. Or alternatively compile and run
using the command:
.RUN IUG_CRIB_GMAG_ICSWSE
NOTE: For more information about MAGDAS and its rules of the road, see:
http://data.icswse.kyushu-u.ac.jp/
Written by: Shuji Abe, Feb. 03, 2018
International Center for Space Weather Science and Education, Kyushu University, Japan
abeshu _at_ icswse.kyushu-u.ac.jp
(See projects/iugonet/examples/iug_crib_gmag_icswse.pro)
PROCEDURE: IUG_CRIB_GMAG_NIPR
A sample crib sheet that explains how to use the "iug_load_gmag_nipr"
procedure. You can run this crib sheet by copying & pasting each
command below (except for stop and end) into the IDL command line.
Or alternatively compile and run using the command:
.run iug_crib_gmag_nipr
NOTE: See the rules of the road.
For more information, see:
http://scidbase.nipr.ac.jp/modules/metadata/index.php?content_id=103
& http://scidbase.nipr.ac.jp/modules/metadata/index.php?content_id=115
Written by: Y.-M. Tanaka, May 2, 2011
National Institute of Polar Research, Japan.
ytanaka at nipr.ac.jp
(See projects/iugonet/examples/iug_crib_gmag_nipr.pro)
PROCEDURE: IUG_CRIB_GMAG_NIPR_INDUCTION
A sample crib sheet that explains how to use the
"iug_load_gmag_nipr_induction" procedure. You can run this crib sheet
by copying & pasting each command below (except for stop and end)
into the IDL command line. Or alternatively compile and run using
the command:
.run iug_crib_gmag_nipr_induction
NOTE: See the rules of the road.
For more information, see:
http://scidbase.nipr.ac.jp/modules/metadata/index.php?content_id=103
& http://scidbase.nipr.ac.jp/modules/metadata/index.php?content_id=115
Written by: Y.-M. Tanaka, May 2, 2011
National Institute of Polar Research, Japan.
ytanaka at nipr.ac.jp
(See projects/iugonet/examples/iug_crib_gmag_nipr_induction.pro)
PROGRAM: iug_crib_gmag_serc
This is an example crib sheet that will load the MAGDAS magnetometer data
released by Space Environment Research Center(SERC), Kyushu University, Japan.
Open this file in a text editor and then use copy and paste to copy
selected lines into an idl window. Or alternatively compile and run
using the command:
.RUN IUG_CRIB_GMAG_SERC
NOTE: For more information about MAGDAS and its rules of the road, see:
http://magdas.serc.kyushu-u.ac.jp/
Written by: Shuji Abe, May 01, 2011
Space Environment Research Center, Kyushu University, Japan
abeshu _at_ serc.kyushu-u.ac.jp
(See projects/iugonet/examples/iug_crib_gmag_serc.pro)
PROCEDURE: IUG_CRIB_GMAG_WDC
A sample crib sheet that explains how to use the "iug_cirb_gmag_wdc"
procedure. You can run this crib sheet by copying & pasting each
command below (except for stop and end) into the IDL command line.
Or alternatively compile and run using the command:
.run iug_crib_gmag_wdc
Written by: Y. KOYAMA, Aug 9,2011
Last Updated: Y. KOYAMA, Oct 6,2011
Last Updated: M. NOSE, Apr 27, 2017
(See projects/iugonet/examples/iug_crib_gmag_wdc.pro)
PROGRAM: iug_crib_gps_isee
This is an example crib sheet that will load GPS-TEC data.
Open this file in a text editor and then use copy and paste to copy
selected lines into an idl window.
Or alternatively compile and run using the command:
.run iug_crib_gps_isee
NOTE: See the rules of the road.
For more information, see https://stdb2.isee.nagoya-u.ac.jp/GPS/GPS-TEC/index.html
Written by: A. Shinbori, Oct 6, 2021
DIMR, ISEE, Nagoya Univ.
$LastChangedBy: $
$LastChangedDate: $
$LastChangedRevision: $
$URL: $
(See projects/iugonet/examples/iug_crib_gps_isee.pro)
PROCEDURE: IUG_CRIB_GPS_RO_RISH.PRO
A sample crib sheet that explains how to use the "iug_crib_gps_ro_rish.pro"
procedure. You can run this crib sheet by copying & pasting each
command below (except for stop and end) into the IDL command line.
Or alternatively compile and run using the command:
.run iug_crib_gps_ro_rish
Written by: A. Shinbori, May 18, 2016
Last Updated: A. Shinbori, May 18, 2016
(See projects/iugonet/examples/iug_crib_gps_ro_rish.pro)
PROCEDURE: IUG_CRIB_HF_TOHOKUU
A crib sheet to demonstrate how to deal with data from
Low Frequency Radio Transmitter Observation (LFRTO) using udas.
You can run this crib sheet by copying&pasting each command
below into the IDL command line.
Or alternatively compile and run using the command:
.run iug_crib_lfrto
Written by: M. Yagi, Jan 20, 2013
Last Update: M. Yagi, Jan 22, 2014
(See projects/iugonet/examples/iug_crib_hf_tohokuu.pro)
PROCEDURE: IUG_CRIB_IONOSONDE_RISH.PRO
A sample crib sheet that explains how to use the "iug_load_ionosonde_rish.pro"
procedure. You can run this crib sheet by copying & pasting each
command below (except for stop and end) into the IDL command line.
Or alternatively compile and run using the command:
.run iug_crib_aws_rish
Written by: A. Shinbori, Nov 12, 2012
Last Updated: A. Shinbori, Feb 25, 2013
(See projects/iugonet/examples/iug_crib_ionosonde_rish.pro)
PROCEDURE: IUG_CRIB_IPRT
A crib sheet to demonstrate how to deal with data from Iitate
planetary radio observatory using udas. You can run this crib
sheet by copying&pasting each command below into the IDL command line.
Or alternatively compile and run using the command:
.run iug_crib_iprt
Written by: M. Yoneda, Nov 11, 2011
Last Update: M. Yoneda, Jan 30, 2012
;;;;;;;;;;;;CAUTION;;;;;;;;;;;;;;
To plot data from Iitate planetary radio observatory, libraries for fits
files must be installed into your computer (fits_read, sxpar, fits_open,
fits_close, gettok, sxdelpar, sxaddpar, and valid_num) in addition to the
udas and tdas. They are available at http://idlastro.gsfc.nasa.gov/fitsio.html.
You can download these procedures by running get_fitslib.
(See projects/iugonet/examples/iug_crib_iprt.pro)
PROCEDURE: IUG_CRIB_IRIO_NIPR
A sample crib sheet that explains how to use the "iug_load_irio_nipr"
procedure. You can run this crib sheet by copying & pasting each
command below (except for stop and end) into the IDL command line.
Or alternatively compile and run using the command:
.run iug_crib_irio_nipr
NOTE: See the rules of the road.
For more information, see:
http://scidbase.nipr.ac.jp/modules/metadata/index.php?content_id=104
& http://scidbase.nipr.ac.jp/modules/metadata/index.php?content_id=115
Written by: Y.-M. Tanaka, May 2, 2011
National Institute of Polar Research, Japan.
ytanaka at nipr.ac.jp
(See projects/iugonet/examples/iug_crib_irio_nipr.pro)
PROCEDURE: IUG_CRIB_KYUSHUGCM
A sample crib sheet that explains how to use the "iug_load_kyushugcm"
procedure. You can run this crib sheet by copying & pasting each
command below (except for stop and end) into the IDL command line.
Or alternatively compile and run using the command:
.run iug_crib_kyushugcm
NOTE: See the rules of the road.
The simulation data are 3D and have a large file size (about 100MB).
The large file size may cause long download time and out of memory
depending on the situation.
Written by: Y.-M. Tanaka, August, 2013
National Institute of Polar Research, Japan.
ytanaka at nipr.ac.jp
(See projects/iugonet/examples/iug_crib_kyushugcm.pro)
PROCEDURE: IUG_CRIB_LFRTO
A crib sheet to demonstrate how to deal with data from
Low Frequency Radio Transmitter Observation (LFRTO) using udas.
You can run this crib sheet by copying&pasting each command
below into the IDL command line.
Or alternatively compile and run using the command:
.run iug_crib_lfrto
Written by: M. Yagi, Jan 20, 2013
Last Update: M. Yagi, Jan 20, 2013
(See projects/iugonet/examples/iug_crib_lfrto.pro)
PROCEDURE: IUG_CRIB_LTR_RISH.PRO
A sample crib sheet that explains how to use the "iug_load_ltr_rish.pro"
procedure. You can run this crib sheet by copying & pasting each
command below (except for stop and end) into the IDL command line.
Or alternatively compile and run using the command:
.run iug_crib_ltr_rish
Written by: A. Shinbori, Feb 18, 2011
Last Updated: A. Shinbori, Dec 26, 2011
(See projects/iugonet/examples/iug_crib_ltr_rish.pro)
PROCEDURE: iug_crib_map2d
A sample crib sheet that explains how to plot 2D data on the
world map. You can run this crib sheet by copying & pasting each
command below (except for stop and end) into the IDL command line.
Or alternatively compile and run using the command:
.run iug_crib_map2d
Written by: Y.-M. Tanaka, Aug. 1, 2014
National Institute of Polar Research, Japan.
ytanaka at nipr.ac.jp
(See projects/iugonet/examples/iug_crib_map2d.pro)
PROCEDURE: IUG_CRIB_MDDB
A sample crib sheet that explains how to search data from IUGONET
metadata database (MDDB). You can run this crib sheet by copying
& pasting each command below (except for stop and end) into the
IDL command line. Or alternatively compile and run using the command:
.run iug_crib_mddb
NOTE: For more information of the IUGONET project, see:
http://www.iugonet.org/en
& http://search.iugonet.org/iugonet/.
Written by: Y.-M. Tanaka, May 2, 2011
National Institute of Polar Research, Japan.
ytanaka at nipr.ac.jp
(See projects/iugonet/examples/iug_crib_mddb.pro)
PROCEDURE: IUG_CRIB_METEOR_NIPR.PRO
A sample crib sheet that explains how to use the "iug_crib_meteor_nipr.pro"
procedure. You can run this crib sheet by copying & pasting each
command below (except for stop and end) into the IDL command line.
Or alternatively compile and run using the command:
.run iug_crib_meteor_nipr
Written by: Y.-M. Tanaka, Aug. 2, 2012
(See projects/iugonet/examples/iug_crib_meteor_nipr.pro)
PROCEDURE: IUG_CRIB_METEOR_RISH.PRO
A sample crib sheet that explains how to use the "iug_crib_meteor_rish.pro"
procedure. You can run this crib sheet by copying & pasting each
command below (except for stop and end) into the IDL command line.
Or alternatively compile and run using the command:
.run iug_crib_meteor_rish
Written by: A. Shinbori, Jul 25, 2012
Last Updated: A. Shinbori, May 30, 2013
(See projects/iugonet/examples/iug_crib_meteor_rish.pro)
PROCEDURE: IUG_CRIB_MF_RISH.PRO
A sample crib sheet that explains how to use the "iug_crib_mf_rish.pro"
procedure. You can run this crib sheet by copying & pasting each
command below (except for stop and end) into the IDL command line.
Or alternatively compile and run using the command:
.run iug_crib_mf_rish
Written by: A. Shinbori, Jul 25, 2012
Last Updated: A. Shinbori, Jun 1, 2013
(See projects/iugonet/examples/iug_crib_mf_rish.pro)
PROCEDURE: IUG_CRIB_MU.PRO
A sample crib sheet that explains how to use the "iug_load_mu.pro"
procedure. You can run this crib sheet by copying & pasting each
command below (except for stop and end) into the IDL command line.
Or alternatively compile and run using the command:
.run iug_crib_mu
Written by: A. Shinbori, Feb 18, 2011
Last Updated: A. Shinbori, Jan 07, 2014
(See projects/iugonet/examples/iug_crib_mu.pro)
PROCEDURE: IUG_CRIB_RADIOSONDE_RISH.PRO
A sample crib sheet that explains how to use the "iug_load_radiosonde_rish.pro"
procedure. You can run this crib sheet by copying & pasting each
command below (except for stop and end) into the IDL command line.
Or alternatively compile and run using the command:
.run iug_crib_ltr_rish
Written by: A. Shinbori, Apr 12, 2013
Last Updated: A. Shinbori, Oct 27, 2014
(See projects/iugonet/examples/iug_crib_radiosonde_rish.pro)
PROCEDURE: IUG_CRIB_SMART
A sample crib sheet that explains how to use the "iug_load_smart"
procedure. You can run this crib sheet by copying & pasting each
command below (except for stop and end) into the IDL command line.
Or alternatively compile and run using the command:
.run iug_crib_smart
:Author:
Y.-M. Tanaka (E-mail: ytanaka at nipr.ac.jp)
Satoru UeNo (E-mail: ueno@kwasan.kyoto-u.ac.jp)
(See projects/iugonet/examples/iug_crib_smart.pro)
PROCEDURE: IUG_CRIB_WPR_RISH.PRO
A sample crib sheet that explains how to use the "iug_load_wpr_rish.pro"
procedure. You can run this crib sheet by copying & pasting each
command below (except for stop and end) into the IDL command line.
Or alternatively compile and run using the command:
.run iug_crib_ltr_rish
Written by: A. Shinbori, Nov 12, 2011
Last Updated: A. Shinbori, Dec 26, 2011
(See projects/iugonet/examples/iug_crib_wpr_rish.pro)