; $Id: read_ascii_cmdline.pro 12128 2013-04-22 22:31:56Z jwl $
;
; Copyright (c) 1996-2008, ITT Visual Information Solutions. All
;       rights reserved. Unauthorized reproduction is prohibited.
;+
; NAME:
;   READ_ASCII_CMDLINE
;
; PURPOSE:
;   Read data from an ASCII file into IDL.
;
; CATEGORY:
;   Input/Output.
;
; CALLING SEQUENCE:
;   data = READ_ASCII(file)
;
; INPUTS:
;   file          - Name of file to read.
;
; INPUT KEYWORD PARAMETERS:
;   record_start      - 1st sequential "record" (see DESCRIPTION) to read.
;               Default = 0 (the first record of the file).
;   num_records   - Number of records to read.
;               Default = 0 = Read up to and including the last record.
;
;   template      - ASCII file template (e.g., generated by function
;               ASCII_TEMPLATE) describing attributes of the file
;               to read.  Specific attributes contained in the
;               template may be overridden by keywords below.
;               Default = (see the keywords below).
;
;   start_line    - Number of lines of header to skip.
;               Default (if no template) = 0L. (NOTE: this keyword name
;               has been changed from the IDL read_ascii routine. It was data_start.)
;   delimiter     - Character that delimits fields.
;               Default (if no template) = '' = use fields(*).loc.
;   missing_value     - Value to replace any missing/invalid data.
;               Default (if no template) = !VALUES.F_NAN.
;   comment_symbol    - String identifying comments
;               (from comment_symbol to the next end-of-line).
;               Default (if no template) = '' = no comments.
;
;    field_types  - An array of the field (column) IDL data type. This array can be
;                   either a string array or a long array.  Example: ['string', 'double', 'double']
;                   or [7,5,5].  Valid types are ['int', 'long', 'float', 'double', 'string', 
;                   'structure'] or [2, 3, 4, 5, 7, 8]                    
;    field_names  - An array of the names for each field or column. Default values are
;                   Field01, Field02, Field03, ..... Fieldnn. 
;    field_locations - An array of the start positions of each column. Default values are 
;                   zero and the procedure will try to figure it out.  
;    field_groups   - An array of fields that are common to a group.
;
;    [Note:  The 'fields' keyword has not been implemented yet.]
;   fields        - Descriptions of the data fields, formatted as
;                           an array of structures containing the tags:
;                              name  = name of the field (string)
;                              type  = type of field as returned by SIZE (long)
;                              loc   = offset from the beginning of line to
;                                      the start of the field (long)
;                              group = sequential group the field is in (int)
;               Default (if no template) =
;                              {name:'field', type:4L, loc:0L, group:0}.
;
;   verbose       - If set, print runtime messages.
;               Default = Do not print them.
;
; OUTPUT KEYWORD PARAMETERS:
;   header        - The header read (string array of length
;               data_start).  If no header, empty string returned.
;
;   count         - The number of records read.
;
; OUTPUTS:
;   The function returns an anonymous structure, where each field in
;   the structure is a "field" of the data read (see DESCRIPTION).
;   If no records are read, 0 is returned.
;
; COMMON BLOCKS:
;   None.
;
; SIDE EFFECTS:
;   None.
;
; RESTRICTIONS:
;   See DESCRIPTION.
;
; DESCRIPTION:
;   ASCII files handled by this routine consist of an optional header
;   of a fixed number of lines, followed by columnar data.  Files may
;   also contain comments, which exist between a user-specified comment
;   string and the corresponding end-of-line.
;
;   One or more rows of data constitute a "record."  Each data element
;   within a record is considered to be in a different column, or "field."
;   Adjacent fields may be "grouped" into multi-column fields.
;   The data in one field must be of, or promotable to, a single
;   type (e.g., FLOAT).
;
; EXAMPLES:
;   ; Using default file attributes.
;   data = READ_ASCII(file)
;
;   ; Setting specific file attributes.
;   data = READ_ASCII(file, START_LINE=10)
;
;   ; Using a template to define file attributes.
;   data = READ_ASCII(file, TEMPLATE=template)
;
;   ; Using a template to define file attributes,
;   ; and overriding some of those attributes.
;   data = READ_ASCII(file, TEMPLATE=template, START_LINE=10)
;
;   ; Using the ASCII_TEMPLATE GUI to generate a template in place.
;   data = READ_ASCII(file, TEMPLATE=ASCII_TEMPLATE(file))
;
;    [Note:  The 'fields' keyword has not been implemented yet.]
;   ; An example defining fields by hand.
;   fields = REPLICATE({name:'', type:0L, loc:0L, group:0}, 2, 3)
;   num = N_ELEMENTS(fields)
;   fields(*).name  = 'field' + STRTRIM(STRING(INDGEN(num) + 1), 2)
;   fields(*).type  = REPLICATE(4L, num)
;   fields(*).loc   = [0L,10L, 0L,15L, 0L,12L]
;   fields(*).group = INDGEN(num)
;   data = READ_ASCII(file, FIELDS=fields)
;
;    [Note:  The 'fields' keyword has not been implemented yet.]
;   ; Another example defining fields by hand.
;   void = {sMyStructName, name:'', type:0L, loc:0L, group:0}
;   fields = [ [ {sMyStructName, 'frog', (SIZE(''))(1),  0L, 0},   $
;                {sMyStructName, 'bird', (SIZE(0 ))(1), 15L, 1} ], $
;              [ {sMyStructName, 'fish', (SIZE(0.))(1),  0L, 2},   $
;                {sMyStructName, 'bear', (SIZE(0D))(1), 15L, 3} ], $
;              [ {sMyStructName, 'boar', (SIZE(0B))(1),  0L, 4},   $
;                {sMyStructName, 'nerd', (SIZE(OL))(1), 15L, 5} ]  ]
;   data = READ_ASCII(file, FIELDS=fields)
;
; DEVELOPMENT NOTES:
;
;   - See ???,xxx in the code.
;
;   - Error check input 'delimiter' to be a string (not a byte).
;
;   - Implement the 'fields' keyword.
;
; MODIFICATION HISTORY:
;   AL & RPM, 8/96 - Written.
;   PCS, 3/99 - Deploy STRTOK and other new commands.  Gain some speed.
;   CT, Aug 2003: Free up temp pointers if an error occurs.
;   clrussell 10-01-12 - Added five keywords field_count, field_types, field_names, 
;                        field_locations, field_groups. These keywords were added so 
;                        the user could specify these mixed data types without having to 
;                        use a template.
;-

; -----------------------------------------------------------------------------
;
;  Purpose:  Parse out values from a line of text which are in columns.
;
pro ssl_ra_parse_column_values, line, types, p_vals, rec_count, $
    locs, lengths, missingValue, num_fields

    compile_opt HIDDEN, STRICTARR

    on_ioerror, column_cast_failed

    nf1 = num_fields - 1
    for i=0, nf1 do begin

        if (types[i] ne 0) then begin ; (0 == skip field.)
            token = (i eq nf1) ? STRTRIM(STRMID(line, locs[i]),2) : $
                STRTRIM(STRMID(line, locs[i], lengths[i]),2)
            ; Assign substring to the variable. This will automatically do
            ; any necessary type conversions.
            (*p_vals[i])[rec_count] = (STRLEN(token) ne 0) ? token : $
                (types[i] eq 7) ? token : missingValue
            continue
column_cast_failed:
            message, /reset
            (*p_vals[i])[rec_count] = missingValue
        endif
    endfor  ; i
end


; -----------------------------------------------------------------------------
;
;  Purpose:  Parse out values from a line of text which are separated by
;        a given delimiter.
;
pro ssl_ra_parse_delim_values, line, types, p_vals, rec_count, $
  delimit, missing_value, whitespace_delimited

  compile_opt HIDDEN, STRICTARR

  ; Remove whitespace from beginning and end.
  toks = whitespace_delimited ? STRTOK(line, /EXTRACT) : $
    STRTRIM(STRTOK(line, delimit, /EXTRACT, /PRESERVE_NULL), 2)
  length = STRLEN(toks)

  on_ioerror, delim_cast_failed

  n_types = N_ELEMENTS(types)
  n_toks = N_ELEMENTS(toks)
  nMin1 = (n_types < n_toks) - 1

  ; Loop up to the end of the tokens or the number of fields, whichever
  ; is smaller. Empty fields will be filled in after this loop.
  for i=0,nMin1 do begin

    if (types[i] ne 0) then begin ; (0 == skip field.)
        ; Assign the substring to the variable. This will automatically do
        ; any necessary type conversions.
        (*p_vals[i])[rec_count] = (length[i] ne 0) ? toks[i] : $
            ((types[i] eq 7) ? toks[i] : missing_value)
        ; If successful conversion, then continue the loop.
        continue
delim_cast_failed:
        ; If failed conversion, suppress the error and fill with missing.
        message, /reset
        (*p_vals[i])[rec_count] = missing_value
    endif
  endfor


  ; Need to fill in extra fields with missing.
  if (n_toks lt n_types) then begin
    for i=n_toks, n_types-1 do begin
        if (types[i] gt 0) then $
            (*p_vals[i])[rec_count] = missing_value
    endfor
  endif

end         ; ssl_ra_parse_delim_values

; -----------------------------------------------------------------------------
;
;  Purpose:  Read in the next n lines of text (skipping blank lines and
;        commented lines signified by template.commentSymbol at start;
;        also throw away comment portions of regular lines).
;
function ssl_ra_get_next_record, template, unit, lines
  ;
  COMPILE_OPT hidden, strictarr

  on_ioerror, end_of_file
  line = ''
  count = 0

  ;  Checking for comments...
  ;
  if (template.commentSymbol ne '') then begin
    while (count lt n_elements(lines)) do begin
      readf, unit, line
      pos = strpos(line, template.commentSymbol, 0)
      if (strtrim(line,2) ne '' and pos[0] ne 0) then begin
        lines[count] = (pos[0] eq -1) ? line : strmid(line,0,pos[0])
        count = count + 1
      endif
    endwhile

  ;  NOT checking for comments...
  ;
  endif else begin
    while (count lt n_elements(lines)) do begin
      readf, unit, line
      if (strlen(strtrim(line,2)) ne 0) then begin
        lines[count] = line
        count = count + 1
      endif
    endwhile
  endelse

  return, 0 ; success

end_of_file:
  ; If read failed, suppress message and return EOF.
  message, /reset
  return, 1  ; failure, EOF

end   ; ssl_ra_get_next_record

; -----------------------------------------------------------------------------
;
;  Purpose:  Given a template structure, open an ASCII file and parse out the
;        numerical and string values based upon the parameters of the
;        given template.
;
;       (a) white space separates fields lined up in columns
;       (b) a delimiter character separates fields
;
;     Note:  When skipping to the start of the data, blank lines ARE included
;        as lines to skip, but once you get to the data, subsequent blank
;        lines (as well as comment lines) are ignored.
;
;        Function returns an array of pointers to the data read;
;        if no data read, 0 is returned.
;
function ssl_ra_read_from_templ, $
    name, $     ; IN: name of ASCII file to read
    template, $     ; IN: ASCII file template
    start_record, $ ; IN: first record to read
    records_to_read, $  ; IN: number of records to read
    doVerbose, $    ; IN: 1B = print runtime messages
    num_fields_read, $  ; OUT: number of fields successfully read
    fieldNames, $       ; OUT: associated name of each field read
    rec_count, $    ; OUT: number of records successfully read
    num_blocks, $    ; OUT: number of blocks of data
    header=header   ; OUT: (opt) header read

  COMPILE_OPT hidden, strictarr

  ;  Set default numbers.
  ;
  num_fields_read = 0
  num_blocks = 0L

  ;  Catch errors.
  catch, error_status
  if (error_status ne 0) then begin
    CATCH, /CANCEL
    MESSAGE, /INFO, 'Unexpected Error: ' + !ERROR_STATE.msg
    MESSAGE, /RESET
    rec_count = 0l
    return, 0
  endif

  ;  Open the file.
  ;
  openr, unit, name, /get_lun

  ;  Set various parameters.
  ;
  blk_size = 1000  ; each block holds this many records
  blk_count = 500  ; number of blocks we can have
  blk_grow  = 500
  current_block = 0L
  lines_per_record = n_elements(template.fieldCount)
  num_fields = template.fieldCount
  tot_num_fields = total(template.fieldCount)
  types = template.fieldTypes
  locs = template.fieldLocations
  ; The length of the last field depends upon the line length,
  ; so here just make it some arbitrary number.
  fieldLengths = (n_elements(locs) gt 1) ? [locs[1:*],0] - locs : 0

  ;  Define an array of variables for each field.
  ;
  p_vals = ptrarr(tot_num_fields, blk_count)
  for i=0, tot_num_fields-1 do $
    if (types[i] gt 0) then $
      p_vals[i, current_block] = ptr_new(make_array(blk_size, type=types[i]))

  ;  Read the header and skip to the start of the data.
  ;
  dataStart = template.dataStart
  if (dataStart gt 0) then begin
    if (doVerbose) then $
      print, 'Reading header of ' + strtrim(string(dataStart), 2) + $
        ' lines ...', format='(A/)'
    header = strarr(dataStart)
    readf, unit, header
  endif else $
    header = ''

  ;  Skip to the start of requested data.
  ;
  lines = strarr(lines_per_record)
  if ((doVerbose) and (start_record gt 0)) then $
    print, 'Skipping ' + strtrim(string(start_record), 2) + ' records ...', $
      format='(A/)'
  for i = 0L, start_record-1 do $
    end_reached = SSL_RA_GET_NEXT_RECORD(template, unit, lines)

    if template.delimiter eq 32b then begin
      delim_str = string([32b, 9b])
      whitespace_delimited = 1b
    end else begin
      delim_str = string(template.delimiter)
      whitespace_delimited = 0b
    endelse

    nRecord1 = (records_to_read gt 0) ? records_to_read-1L : 2147483647L
    for rec_count = 0L, nRecord1 do begin

        ;  Read a record.
        ;
        end_reached = SSL_RA_GET_NEXT_RECORD(template, unit, lines)
        if (end_reached) then break ; out of the for loop

        ;xxx
        if (doVerbose) then $
        print, 'Processing sequential record ' + $
          strtrim(string(rec_count+1), 2) + ' ...'

        anchor = 0
        rc = rec_count-current_block*blk_size

        ;  For each line in the record...
        ;
        for i=0,lines_per_record-1 do begin

            if (template.delimiter eq 0B) then begin
                ; nice columned data...
                ssl_ra_parse_column_values, lines[i], $
                    types[ anchor:anchor+num_fields[i]-1], $
                    p_vals[anchor:anchor+num_fields[i]-1, current_block], $
                    rc, $
                    locs[ anchor:anchor+num_fields[i]-1], $
                    fieldLengths[anchor:anchor+num_fields[i]-1], $
                    template.missingValue, $
                    num_fields[i]
            endif else begin
                ; data separated by a delimiter...
                ssl_ra_parse_delim_values, lines[i], $
                    types[ anchor:anchor+num_fields[i]-1], $
                    p_vals[anchor:anchor+num_fields[i]-1, current_block], $
                    rc, $
                    delim_str, $
                    template.missingValue, $
                    whitespace_delimited
            endelse
            anchor = anchor + num_fields[i]
        endfor  ; i

        ; If block is now full,
        ; Allocate and point to a new block
        ;
        if ((rec_count+1) mod blk_size eq 0) then begin
            current_block = current_block + 1
            if (current_block eq blk_count) then begin
                p_vals = [[p_vals], [ptrarr(tot_num_fields, blk_grow)]]
                blk_count = blk_count + blk_grow
            endif
            for i=0, tot_num_fields-1 do if (types[i] gt 0) then $
                p_vals[i, current_block] = $
                    ptr_new(make_array(blk_size, type=types[i]))
        endif  ; new block
    endfor  ; read

  ; ------------------------------------
  free_lun, unit

  if (doVerbose) then $
    print, 'Total records read:  ' + strtrim(string(rec_count), 2), $
      format='(A/)'

    ; No records were read.
    if (rec_count eq 0) then begin
        PTR_FREE, p_vals
        return, 0
    endif

    ;  If records were read ...
    ;  Set the output arrays to exactly the correct size.
    ;
    for i=0, tot_num_fields-1 do begin
      if (p_vals[i,current_block] ne ptr_new()) then begin
        if (rec_count gt current_block*blk_size) then begin
          *p_vals[i,current_block] = $
            (*p_vals[i,current_block])[0:rec_count-current_block*blk_size-1]
        endif else begin ; block is allocated, but empty
            ptr_free, p_vals[i,current_block]
        endelse
      endif
    endfor
    if (rec_count gt current_block*blk_size) then begin
      num_blocks = current_block + 1
    endif else begin
      num_blocks = current_block
    endelse

    ;  Check the groups array and arrange the output pointers into
    ;  (potentially) groups of 2-D arrays.
    ;
    groups = template.fieldGroups

    ;  Don't include any groups which are skipped fields.
    ;
    ptr = where(types eq 0, numSkip)
    for i=0, numSkip-1 do groups[ptr[i]] = max(groups) + 1

    ;  Concatenate 1-D arrays into multi arrays based upon groupings.
    ;
    uptr = uniq(groups, sort(groups))
    if (n_elements(uptr) lt n_elements(groups)) then begin
      for i=0, n_elements(uptr)-1 do begin
          for b=0, num_blocks-1 do begin
            lptr = where(groups eq groups[uptr[i]], lcount)
            if (lcount gt 1) then begin
              p_new = p_vals[lptr[0],b]
              for j=1,lcount-1 do begin
                *p_new = [[temporary(*p_new)],[temporary(*p_vals[lptr[j],b])]]
                ptr_free, p_vals[lptr[j],b]
                p_vals[lptr[j],b] = ptr_new()
              endfor
              *p_new = transpose(temporary(*p_new))
            endif
          endfor
      endfor
    endif

    ;  Return the pointers that contain data, if any.
    ;  and the associated fieldNames for these pointers
    ;
    ptr = where(p_vals[*,0] ne ptr_new(), num_fields_read)

    if (num_fields_read gt 0) then begin ; data successfully read
      fieldNames = template.fieldNames[ptr]
      return, p_vals[ptr,*]
    endif else begin                           ; no data read
      rec_count = 0l
      return, 0
    endelse

end         ; ssl_ra_read_from_templ

; -----------------------------------------------------------------------------
;
;  Purpose:  Return 1B if the template is valid, else 0B.
;
function ssl_ra_valid_template, $
  template, $       ; IN: template to check
  message           ; OUT: error message if the template is not valid

  COMPILE_OPT hidden, strictarr

  message = ''

  ;  Make sure it's a structure.
  ;
  sz = size(template)
  if (sz[sz[0]+1] ne 8) then begin
    message = 'Template is not a structure.'
    RETURN, 0B
  endif

  ;  Get tag names and make sure version field is present.
  ;
  tagNamesFound = TAG_NAMES(template)
  void = WHERE(tagNamesFound eq 'VERSION', count)
  if (count ne 1) then begin
    message = 'Version field missing from template.'
    RETURN, 0B
  endif

  ;  Do checking based on version.
  ;
  case (template.version) of

    1.0: begin

      ;  Set the names of the required tags (version alread checked).
      ;
      tagNamesRequired = STRUPCASE([ $
        'dataStart', 'delimiter', 'missingValue', 'commentSymbol', $
        'fieldCount', 'fieldTypes', 'fieldNames', 'fieldLocations', $
        'fieldGroups'])

      ;  Check that all of the required tags are present.
      ;
      for seqTag = 0, N_ELEMENTS(tagNamesRequired)-1 do begin
        tag = tagNamesRequired[seqTag]
        void = WHERE(tagNamesFound eq tag, count)
        if (count ne 1) then begin
          message = tag + ' field missing from template.'
          RETURN, 0B
        endif
      endfor

    end

    else: begin
      message = 'The only recognized template version is 1.0 (float).'
      RETURN, 0B
    end
  endcase

  ; Check for valid structure tag names before we try to
  ; read the file.
  for i=0,N_ELEMENTS(template.fieldNames)-1 do begin
    if (IDL_VALIDNAME(template.fieldNames[i], /CONVERT_SPACES) eq '') then begin
        message = 'Illegal field name: ' + template.fieldNames[i]
        return, 0b  ; failure
    endif
  endfor


  ;  Return that the template is valid.
  ;
  RETURN, 1B

end         ; ssl_ra_valid_template

; -----------------------------------------------------------------------------
;
;  Purpose:  Convert to string and remove extra white space.
;
function ssl_ra_stringit, value

  COMPILE_OPT hidden, strictarr

  result = STRTRIM( STRCOMPRESS( STRING(value) ), 2 )

  num = N_ELEMENTS(result)

  if (num le 1) then RETURN, result

  ;  If two or more values, concatenate them.
  ;
  delim = ' '
  ret = result[0]
  for i = 1, num-1 do $
    ret = ret + delim + result[i]

  RETURN, ret

end         ; ssl_ra_stringit

; -----------------------------------------------------------------------------
;
;  Purpose:  Guess at the number of columns in an ASCII file.
;
function ssl_ra_guess_columns, fname, dataStart, commentSymbol, delimiter

  COMPILE_OPT hidden, strictarr

  on_error, 2 ; Return to caller on error.

  catch, err_stat
  if err_stat ne 0 then begin
    catch, /cancel
    if n_elements(lun) gt 0 then $
      if (lun ne 0) then free_lun, lun
    message, !error_state.msg
  endif

  get_lun, lun
  openr, lun, fname

  if dataStart gt 0 then begin
    header = strarr(dataStart)
    readf, lun, header
  end

  line = ''
  end_reached = SSL_RA_GET_NEXT_RECORD({commentSymbol: commentSymbol}, $
    lun, line)

  if end_reached then $
    message, 'No columns found.'

  if delimiter eq ' ' then $
    positions = strtok(line) $
  else $
    positions = strtok(line, delimiter, /preserve_null)

  close, lun
  free_lun, lun
  return, n_elements(positions)
end

; -----------------------------------------------------------------------------
;
;  Purpose: Check that the input filename is a string, exists, and appears
;           to be ASCII.
;
function ssl_ra_check_file, fname

  COMPILE_OPT hidden, strictarr

  if (SIZE(fname, /TYPE) ne 7) then $
    return, -1 ; filename isn't a string

  info = FILE_INFO(fname)
  if (~info.exists) then $
    return, -2
  if (~info.read) then $
    return, -3

  success = QUERY_ASCII(fname)
  return, success ? 1 : -4

end


; ------------------------------------------------------------------------
; Use a recursive approach to constructing the result structure.
; We used to do this by just concatanating each field onto the end of the
; existing structure, but this is extremely inefficient, as the entire
; structure must be copied over and over.
; The recursive approach builds up separate structures, and then
; concatanates them together.
;
function ssl_read_ascii_create_struct, fieldnames, xData

    compile_opt idl2, hidden

    nFields = N_ELEMENTS(fieldnames)

    case (nFields) of

        0: return, 0   ; this shouldn't happen

        ; Create a structure with a single field.
        1: return, CREATE_STRUCT(fieldnames[0], TEMPORARY(*xData[0]))

        ; Create a structure with two fields.
        2: return, CREATE_STRUCT( $
            fieldnames[0], TEMPORARY(*xData[0]), $
            fieldnames[1], TEMPORARY(*xData[1]))

        ; Create a structure with three fields.
        3: return, CREATE_STRUCT( $
            fieldnames[0], TEMPORARY(*xData[0]), $
            fieldnames[1], TEMPORARY(*xData[1]), $
            fieldnames[2], TEMPORARY(*xData[2]))

        else: begin

        ; Divide into 4 equal-sized sets of pointers, and concatanate
        ; the structures. Four is somewhat arbitrary, but on average,
        ; this will then require only 1/4 of the memory, as compared
        ; to simply concatanating the fields onto the end.
        d = nFields/4
        ; Recursive call.
        return, CREATE_STRUCT( $
            SSL_READ_ASCII_CREATE_STRUCT(fieldnames[0:d-1], xData[0:d-1]), $
            SSL_READ_ASCII_CREATE_STRUCT(fieldnames[d:2*d-1], xData[d:2*d-1]), $
            SSL_READ_ASCII_CREATE_STRUCT(fieldnames[2*d:3*d-1], xData[2*d:3*d-1]), $
            SSL_READ_ASCII_CREATE_STRUCT(fieldnames[3*d:*], xData[3*d:*]))
        end

    endcase

end


; -----------------------------------------------------------------------------
;
;  Purpose:  The main routine.
;
function read_ascii_cmdline, $
    file, $             ; IN:
    RECORD_START=recordStart, $     ; IN: (opt)
    NUM_RECORDS=numRecords, $       ; IN: (opt)
    TEMPLATE=template, $        ; IN: (opt)
    START_LINE=dataStart, $     ; IN: (opt)
    FIELD_TYPES=fieldTypes, $   ; IN: (opt)
    FIELD_NAMES=fieldNames, $   ; IN: (opt)
    FIELD_LOCATIONS=fieldLocations, $ ; IN: (opt)
    FIELD_GROUPS=fieldGroups, $ ; IN: (opt)
    DELIMITER=delimiter, $      ; IN: (opt)
    MISSING_VALUE=missingValue, $   ; IN: (opt)
    COMMENT_SYMBOL=commentSymbol, $ ; IN: (opt)
;    FIELDS=fields, $           ; IN: (opt)    [not implemented]
    VERBOSE=verbose, $          ; IN: (opt)
    HEADER=header, $            ; OUT: (opt)
    COUNT=count             ; OUT: (opt)

    COMPILE_OPT strictarr
  ;xxx
  ;later add a VERSION kw ?

  ;  Set to return to caller on error.
  ;
  ON_ERROR, 2


  ;  Set some defaults.
  ;
  count = 0
  currentVersion = 1.0
  doVerbose = KEYWORD_SET(verbose)

  ;  If no file specified, use DIALOG_PICKFILE
  ;
  if (n_elements(file) eq 0) then begin
    file = DIALOG_PICKFILE(/MUST_EXIST)
    if (file eq '') then RETURN, 0
  endif

  ; check that the file is readable and appears to be ASCII
  ;
  ret = ssl_ra_check_file(file)
  case ret of
    -1: MESSAGE, 'File name must be a string.'
    -2: MESSAGE, 'File "' + file + '" not found.'
    -3: MESSAGE, 'Error Reading from file "' + file + '"'
    -4: MESSAGE, 'File "' + file + '" is not a valid ASCII file.'
    else:
  endcase

  ;  Set which records to read.
  ;
  if (N_ELEMENTS(recordStart) ne 0) then recordStartUse = recordStart $
                                    else recordStartUse = 0
  if (N_ELEMENTS(numRecords) ne 0)  then numRecordsUse = numRecords $
                                    else numRecordsUse = 0
  if (N_ELEMENTS(template) gt 0) then begin
    if (not ssl_ra_valid_template(template, message)) then $
      MESSAGE, message

    versionUse      = template.version
    dataStartUse    = template.dataStart
    delimiterUse    = STRING(template.delimiter)
    missingValueUse = template.missingValue
    commentSymbolUse    = template.commentSymbol
  endif else begin
    versionUse      = currentVersion
    dataStartUse    = 0L
    delimiterUse    = ' '
    missingValueUse = !values.f_nan
    commentSymbolUse    = ''
  endelse

  if n_elements(dataStart) ne 0 then $
    dataStartUse = dataStart
  if n_elements(delimiter) ne 0 then $
    delimiterUse = delimiter
  if n_elements(missingValue) ne 0 then $
    missingValueUse = missingValue
  if n_elements(commentSymbol) ne 0 then $
    commentSymbolUse = commentSymbol

  ; if fieldTypes keyword is set and it is not of type long, in otherwords it's a string
  ; array, then convert the string types of longs.
  if size(fieldTypes, /type) ne 3 and size(fieldTypes, /type) ne 0 then begin
     fieldTypesUse=make_array(n_elements(fieldTypes), /long)
     for i=0,n_elements(fieldTypes)-1 do begin
         case strlowcase(fieldTypes[i]) of 
            'int'       : fieldTypesUse[i]=2L
            'long'      : fieldTypesUse[i]=3L
            'float'     : fieldTypesUse[i]=4L
            'double'    : fieldTypesUse[i]=5L
            'string'    : fieldTypesUse[i]=7L
            'structure' : fieldTypesUse[i]=8L
         else:  begin
             message, 'Invalid field_types entered.'
             message, 'Valid field_types include [int, long, float, double, string, structure].'
             return, -1
         endelse
         endcase
     endfor
  endif else begin
     if size(fieldTypes, /type) eq 3 then fieldTypesUse = fieldTypes   
  endelse
  
  if n_elements(dataStartUse) gt 1 then $
    message, 'DATA_START must be a scalar.'
  if n_elements(byte(delimiterUse)) gt 1 then $ ; Might want to remove this
    message, 'DELIMITER must be one character.' ; restriction in the future.

  ;  (For back version compatibility, we do not throw an error
  ;  here if n_elements(missingValueUse) gt 1).
  ;

  ;  The READ_ASCII that shipped with IDL 5.2.1 returns 0 when
  ;  an array of comment symbols is specified.  Set the error_state
  ;  in this case, but, for back version compatibility, continue
  ;  and reproduce the "return 0" behavior here.
  ;
  if n_elements(commentSymbolUse) gt 1 then begin
    message, $
      'Multiple comment symbols are not currently supported.', $
      /noprint, $
      /continue
    return, 0
  endif

  if n_elements(template) gt 0 then begin
    fieldCountUse   = template.fieldCount
    fieldTypesUse   = template.fieldTypes
    fieldNamesUse   = template.fieldNames
    fieldLocationsUse   = template.fieldLocations
    fieldGroupsUse  = template.fieldGroups
  endif else begin
    fieldCountUse = n_elements(fieldTypes) $
      > n_elements(fieldNames) $
      > n_elements(fieldLocations) $
      > n_elements(fieldGroups)
    if fieldCountUse le 0 then $
      fieldCountUse = ssl_ra_guess_columns( $
        file, $
        dataStartUse, $
        commentSymbolUse, $
        delimiterUse $
        )

    if size(fieldTypesUse, /type) eq 0 then fieldTypesUse = REPLICATE(4L, fieldCountUse)
    digits_str = strtrim(string(strlen(strtrim(string(fieldCountUse),2))),2)
    fstr = '(i' + digits_str + '.' + digits_str + ')'
    fieldNamesUse   = 'field' + STRING(INDGEN(fieldCountUse)+1, format=fstr)
    fieldLocationsUse   = LONARR(fieldCountUse)
    fieldGroupsUse  = INDGEN(fieldCountUse)
  endelse

;  if n_elements(fieldTypes) ne 0 then $
;    fieldTypesUse = fieldTypes
  if n_elements(fieldNames) ne 0 then $
    fieldNamesUse = fieldNames
  if n_elements(fieldLocations) ne 0 then $
    fieldLocationsUse = fieldLocations
  if n_elements(fieldGroups) ne 0 then $
    fieldGroupsUse = fieldGroups 
  ;  Error check the field data.
  ;
  lengths = [ $
    N_ELEMENTS(fieldTypesUse), $
    N_ELEMENTS(fieldNamesUse), $
    N_ELEMENTS(fieldLocationsUse), $
    N_ELEMENTS(fieldGroupsUse) $
    ]
  if (TOTAL(ABS(lengths - SHIFT(lengths, 1))) ne 0) then $
    MESSAGE, 'Field data (types/names/locs/groups) not the same length.'

  ;  Set the template to use.
  ;
  templateUse = { $
    version: versionUse, $
    dataStart: dataStartUse, $
    delimiter: BYTE(delimiterUse), $
    missingValue: missingValueUse, $
    commentSymbol: commentSymbolUse, $
    fieldCount: fieldCountUse, $
    fieldTypes: fieldTypesUse, $
    fieldNames: fieldNamesUse, $
    fieldLocations: fieldLocationsUse, $
    fieldGroups: fieldGroupsUse $
    }

  ;  Print verbose information.
  ;
  if (doVerbose) then begin
    PRINT, 'Using the following file attributes ...', FORMAT='(/A)'
    PRINT, '        Data Start:  ' + STRTRIM(STRING(dataStartUse), 2)
    PRINT, '         Delimiter:  ' + $
                             STRTRIM(STRING(FIX(BYTE(delimiterUse))), 2) + 'B'
    PRINT, '     Missing Value:  ' + STRTRIM(STRING(missingValueUse), 2)
    PRINT, '    Comment Symbol:  ' + commentSymbolUse
    PRINT, '      Field Counts:  ' + ssl_ra_stringit(fieldCountUse)
    PRINT, '      Field Types :  ' + ssl_ra_stringit(fieldTypesUse)
    PRINT, '      Field Names :  ' + ssl_ra_stringit(fieldNamesUse)
    PRINT, '      Field Locs  :  ' + ssl_ra_stringit(fieldLocationsUse)
    PRINT, '      Field Groups:  ' + ssl_ra_stringit(fieldGroupsUse)
    PRINT, '  Template Version:  ' + STRTRIM(STRING(versionUse), 2)
    PRINT
  endif

  ;  Try to read the file.
  ;
  pData = ssl_ra_read_from_templ(file, templateUse, recordStartUse, $
    numRecordsUse, doVerbose, numFieldsRead, FieldNames, count, num_blocks, header=header)

  ;  Return zero if no records read.
  ;
  if (count eq 0) then $
    RETURN, 0

  ; Concatenate the blocks into fields.
  ;
  xData = ptrarr(numFieldsRead)

    ; If an error occurs, free up our temp pointers.
    CATCH, err
    if (err ne 0) then begin
        CATCH, /CANCEL
        PTR_FREE, xData, pData
        MESSAGE, /REISSUE_LAST
        return, 0
    endif

  for f=0L, numFieldsRead-1 do begin
    type = SIZE(*pData[f,0], /TYPE)
    dims = SIZE(*pData[f,0], /DIMENSIONS)
    n_dims = SIZE(*pData[f,0], /N_DIMENSIONS)
    if (count eq 1) then begin
    ; if the file contains a single record, it is really
    ; two-dimensional: n fields x 1 record
      n_dims = 2
      dims = lonarr(2)
      dims[0] = SIZE(*pData[f,0],/N_ELEMENTS)
    endif
    dims[n_dims-1] = count
    xData[f] = ptr_new(make_array(DIMENSION=dims, TYPE=type))
    start=0L

    for b=0L, num_blocks-1 do begin
      sz = SIZE(*pData[f,b],/N_ELEMENTS)
      stop = start + sz - 1
      (*xData[f])[start:stop] = *pData[f,b]
      ptr_free, pData[f,b]
      start = stop + 1
    endfor
  endfor

  ;  Put the fields into a structure.
  data = SSL_READ_ASCII_CREATE_STRUCT(fieldnames, xData)

  ;  Clean up the heap data.
  ;
  for f = 0L, numFieldsRead-1 do $
    PTR_FREE, xData[f]

  ;  Print verbose information.
  ;
  if (doVerbose) then begin
    PRINT, 'Output data ...'
    HELP, data, /STRUCTURES
    PRINT
  endif

  ;  Return the structure.
  ;
  RETURN, data

end         ; read_ascii