This page was created by the IDL library routine
mk_html_help2.
Last modified: Thu Aug 6 12:53:14 2020.
PROCEDURE: erg_load_gmag_stel_fluxgate
PURPOSE:
To load the STEL fluxgate geomagnetic data from the STEL ERG-SC site
KEYWORDS:
site = Observatory name, example, erg_load_gmag_stel_fluxgate, site='msr',
the default is 'all', i.e., load all available stations.
This can be an array of strings, e.g., ['msr', 'kag']
or a single string delimited by spaces, e.g., 'msr kag'.
Sites for 1 sec data:
msr rik kag ktb
Sites for 1 min/h data:
msr rik kag ktb mdm tew
datatype = Time resolution. '1sec' for 1 sec', '1min' for 1 min, and '1h' for 1 h.
The default is 'all'. If you need two of them, set to 'all'.
/downloadonly, if set, then only download the data, do not load it into variables.
/no_server, use only files which are online locally.
/no_download, use only files which are online locally. (Identical to no_server keyword.)
trange = (Optional) Time range of interest (2 element array).
/timeclip, if set, then data are clipped to the time range set by timespan
EXAMPLE:
erg_load_gmag_stel_fluxgate, site='msr kag', datatype='1min', $
trange=['2003-11-20/00:00:00','2003-11-21/00:00:00']
NOTE: See the rules of the road.
For more information, see http://stdb2.isee.nagoya-u.ac.jp/magne/
and http://www1.osakac.ac.jp/crux/ (for mdm and tew).
HISTORY:
2013-07-19: Originally written by Y. Miyashita
ERG-Science Center, ISEE, Nagoya Univ.
erg-sc-core at isee.nagoya-u.ac.jp
2017-07-07: Satoshi Kurita, ISEE, Nagoya U.
1. Use spd_download instead of file_retrieve
2. renamed STEL to ISEE
$LastChangedDate: 2019-03-17 21:51:57 -0700 (Sun, 17 Mar 2019) $
$LastChangedRevision: 26838 $
(See projects/erg/ground/geomag/erg_load_gmag_isee_fluxgate.pro)
PROCEDURE: erg_load_gmag_isee_induction
PURPOSE:
To load ISEE induction magnetometer data from the ERG-SC site
KEYWORDS:
site = Observatory name, example, erg_load_gmag_stel_induction, site='msr',
the default is 'all', i.e., load all available stations.
This can be an array of strings, e.g., ['msr', 'sta']
or a single string delimited by spaces, e.g., 'msr sta'.
Sites: ath mgd ptk msr sta gak kap zgn
/downloadonly, if set, then only download the data, do not load it into variables.
/no_server, use only files which are online locally.
/no_download, use only files which are online locally. (Identical to no_server keyword.)
trange = (Optional) Time range of interest (2 element array).
/timeclip, if set, then data are clipped to the time range set by timespan
frequency_dependent = get frequecy-dependent sensitivity and phase difference
(frequency [Hz], sensitivity (H,D,Z) [V/nT], and phase_difference (H,D,Z) [deg])
/time_pulse, get time pulse
EXAMPLE:
erg_load_gmag_isee_induction, site='msr sta', $
trange=['2008-02-28/00:00:00','2008-02-28/02:00:00']
NOTE: See the rules of the road.
For more information, see http://stdb2.isee.nagoya-u.ac.jp/magne/
HISTORY:
2011-01-23: Originally written by Y. Miyashita
ERG-Science Center, ISEE, Nagoya Univ.
erg-sc-core at isee.nagoya-u.ac.jp
2017-07-07: Satoshi Kurita, ISEE, Nagoya U.
1. New stations (GAK, KAP, ZGN) are included
2. Use spd_download instead of file_retrieve
$LastChangedDate: 2019-10-23 14:19:14 -0700 (Wed, 23 Oct 2019) $
$LastChangedRevision: 27922 $
(See projects/erg/ground/geomag/erg_load_gmag_isee_induction.pro)
PROCEDURE: erg_load_gmag_magdas_1sec
PURPOSE:
To load the MAGDAS geomagnetic data from the STEL ERG-SC site
KEYWORDS:
site = Observatory name, example, erg_load_magdas_1sec, site='asb',
the default is 'all', i.e., load all available stations.
This can be an array of strings, e.g., ['asb', 'onw']
or a single string delimited by spaces, e.g., 'asb onw'.
Sites for 1 sec data:
asb ...
Sites for 1 min/h data:
...
datatype = Time resolution. '1sec' for 1 sec', '1min' for 1 min, and '1h' for 1 h.
The default is 'all'. If you need two of them, set to 'all'.
/downloadonly, if set, then only download the data, do not load it into variables.
/no_server, use only files which are online locally.
/no_download, use only files which are online locally. (Identical to no_server keyword.)
/verbose
trange = (Optional) Time range of interest (2 element array).
EXAMPLE:
erg_load_gmag_magdas_1sec, site='asb onw', datatype='1sec', $
trange=['2010-11-20/00:00:00','2010-11-21/00:00:00']
NOTE: See the rules of the road.
For more information, see http://magdas.serc.kyushu-u.ac.jp/
Written by: T. Segawa, June 30, 2011
The prototype of this procedure was written by Y. Miyashita, Apr 22, 2010
ERG-Science Center, STEL, Nagoya Univ.
erg-sc-core at st4a.stelab.nagoya-u.ac.jp
$LastChangedDate: 2019-03-17 21:51:57 -0700 (Sun, 17 Mar 2019) $
$LastChangedRevision: 26838 $
(See projects/erg/ground/geomag/erg_load_gmag_magdas_1sec.pro)
PROCEDURE: erg_load_gmag_mm210
PURPOSE:
To load the 210 MM geomagnetic data from the STEL ERG-SC site
KEYWORDS:
site = Observatory name, example, erg_load_gmag_mm210, site='rik',
the default is 'all', i.e., load all available stations.
This can be an array of strings, e.g., ['rik', 'onw']
or a single string delimited by spaces, e.g., 'rik onw'.
Sites for 1 sec data:
msr rik kag ktb can
Sites for 1 min/h data:
tik zgn yak irt ppi bji lnp mut ptn wtk
lmt kat ktn chd zyk mgd ptk msr rik onw
kag ymk cbi gua yap kor ktb bik wew daw
wep bsv dal can adl kot cst ewa asa mcq
datatype = Time resolution. '1sec' for 1 sec, '1min' for 1 min, and '1h' for 1 h.
The default is 'all'. If you need all of them, set to 'all'.
/downloadonly, if set, then only download the data, do not load it into variables.
/no_server, use only files which are online locally.
/no_download, use only files which are online locally. (Identical to no_server keyword.)
trange = (Optional) Time range of interest (2 element array).
/timeclip, if set, then data are clipped to the time range set by timespan
EXAMPLE:
erg_load_gmag_mm210, site='rik onw', datatype='1min', $
trange=['2003-11-20/00:00:00','2003-11-21/00:00:00']
NOTE: See the rules of the road.
For more information, see http://stdb2.isee.nagoya-u.ac.jp/mm210/
Written by: Y. Miyashita, Apr 22, 2010
ERG-Science Center, ISEE, Nagoya Univ.
erg-sc-core at isee.nagoya-u.ac.jp
$LastChangedDate: 2019-03-17 21:51:57 -0700 (Sun, 17 Mar 2019) $
$LastChangedRevision: 26838 $
(See projects/erg/ground/geomag/erg_load_gmag_mm210.pro)
PROCEDURE: ERG_LOAD_GMAG_NIPR
erg_load_gmag_nipr, site = site, $
datatype=datatype, $
trange=trange, $
verbose=verbose, $
downloadonly=downloadonly
no_download=no_download
PURPOSE:
Loads the fluxgate magnetometer data obtained by NIPR.
NOTE: This procedure is a simple alias to "iug_load_gmag_nipr"
and calls the original one by just providing the same
arguments/keywords given.
Some load procedures for the ground-based observational data in
the IUGONET projetct, named "iug_load_???", can be also called
by "erg_load_???", because these data are related to the both
ERG and IUGONET projects.
For more information, see http://www.iugonet.org/en/
and http://gemsissc.stelab.nagoya-u.ac.jp/erg/
KEYWORDS:
site = Observatory name, example, erg_load_gmag_nipr, site='syo',
the default is 'all', i.e., load all available stations.
This can be an array of strings, e.g., ['syo', 'hus']
or a single string delimited by spaces, e.g., 'syo hus'.
Available sites: syo hus tjo aed isa
datatype = Time resolution. Please notice that '1sec' means nearly
1-sec time resolution. Even if datatype was set to '1sec',
the time resolution corresponds to
2sec : syo(1981-1997), hus & tjo(1984-2001/08), isa(1984-1989),
aed(1989-1999/10)
1sec : syo(1997-present)
0.5sec : hus & tjo(2001/09-present), aed(2001/09-2008/08)
Available datatype: 1sec(default) or 20hz
trange = (Optional) Time range of interest (2 element array).
/verbose : set to output some useful info
/downloadonly: if set, then only download the data, do not load it
into variables.
/no_download: use only files which are online locally.
EXAMPLE:
erg_load_gmag_nipr, site='syo', $
trange=['2003-11-20/00:00:00','2003-11-21/00:00:00']
Written by Y.-M. Tanaka, December 24, 2010 (ytanaka at nipr.ac.jp)
Changed from original load procedure to the alias, by Y.-M Tanaka,
July 24, 2012.
(See projects/erg/ground/geomag/erg_load_gmag_nipr.pro)
PROCEDURE: erg_load_gmag_stel_fluxgate
PURPOSE:
To load the STEL fluxgate geomagnetic data from the STEL ERG-SC site
KEYWORDS:
site = Observatory name, example, erg_load_gmag_stel_fluxgate, site='msr',
the default is 'all', i.e., load all available stations.
This can be an array of strings, e.g., ['msr', 'kag']
or a single string delimited by spaces, e.g., 'msr kag'.
Sites for 1 sec data:
msr rik kag ktb
Sites for 1 min/h data:
msr rik kag ktb mdm tew
datatype = Time resolution. '1sec' for 1 sec', '1min' for 1 min, and '1h' for 1 h.
The default is 'all'. If you need two of them, set to 'all'.
/downloadonly, if set, then only download the data, do not load it into variables.
/no_server, use only files which are online locally.
/no_download, use only files which are online locally. (Identical to no_server keyword.)
trange = (Optional) Time range of interest (2 element array).
/timeclip, if set, then data are clipped to the time range set by timespan
EXAMPLE:
erg_load_gmag_stel_fluxgate, site='msr kag', datatype='1min', $
trange=['2003-11-20/00:00:00','2003-11-21/00:00:00']
NOTE: See the rules of the road.
For more information, see http://stdb2.isee.nagoya-u.ac.jp/magne/
and http://www1.osakac.ac.jp/crux/ (for mdm and tew).
Written by: Y. Miyashita, Jun 19, 2013
ERG-Science Center, ISEE, Nagoya Univ.
erg-sc-core at isee.nagoya-u.ac.jp
Changed from original load procedure to the alias, by S. Kurita,
Nov. 20, 2017.
$LastChangedDate: 2019-03-17 21:51:57 -0700 (Sun, 17 Mar 2019) $
$LastChangedRevision: 26838 $
(See projects/erg/ground/geomag/erg_load_gmag_stel_fluxgate.pro)
PROCEDURE: erg_load_gmag_stel_induction
PURPOSE:
To load STEL induction magnetometer data from the STEL ERG-SC site
KEYWORDS:
site = Observatory name, example, erg_load_gmag_stel_induction, site='msr',
the default is 'all', i.e., load all available stations.
This can be an array of strings, e.g., ['msr', 'sta']
or a single string delimited by spaces, e.g., 'msr sta'.
Sites: ath mgd ptk msr sta
/downloadonly, if set, then only download the data, do not load it into variables.
/no_server, use only files which are online locally.
/no_download, use only files which are online locally. (Identical to no_server keyword.)
trange = (Optional) Time range of interest (2 element array).
/timeclip, if set, then data are clipped to the time range set by timespan
frequency_dependent = get frequecy-dependent sensitivity and phase difference
(frequency [Hz], sensitivity (H,D,Z) [V/nT], and phase_difference (H,D,Z) [deg])
/time_pulse, get time pulse
EXAMPLE:
erg_load_gmag_stel_induction, site='msr sta', $
trange=['2008-02-28/00:00:00','2008-02-28/02:00:00']
NOTE: See the rules of the road.
For more information, see http://stdb2.isee.nagoya-u.ac.jp/magne/
Written by: Y. Miyashita, Jan 23, 2011
ERG-Science Center, ISEE, Nagoya Univ.
erg-sc-core at isee.nagoya-u.ac.jp
Changed from original load procedure to the alias, by S. Kurita,
Nov. 20, 2017.
$LastChangedDate: 2019-03-17 21:51:57 -0700 (Sun, 17 Mar 2019) $
$LastChangedRevision: 26838 $
(See projects/erg/ground/geomag/erg_load_gmag_stel_induction.pro)
PRO isee_induction_cal_resp
PURPOSE:
To make calibrated frequency-time spectrogram of ISEE induction magnetometers
Calibration for power spectral density at a given frequency is peformed as follows:
S_calib(f) = S_org(f) / cal_table(f) / cal_table(f)
where S_calib [nT^2/Hz] is calibrated power spectral density, S_org [V^2/Hz] is power spectral density
computed from the data in CDF files, cal_table [V/nT] is the sensitivity included in CDF files.
INPUT:
site = Observatory name, example, erg_load_gmag_stel_induction, site='msr',
the default is 'all', i.e., load all available stations.
This can be an array of strings, e.g., ['msr', 'sta']
or a single string delimited by spaces, e.g., 'msr sta'.
Sites: ath mgd ptk msr sta gak kap zgn hus(after 2018-09-06)
nbox = number of FFT points
nshift = number of shift points for FFT, nshift should be equal or lower than nbox
EXAMPLE:
;load 1 day data from Gakona and perform calibration
timespan,'2017-03-21',1,/day
erg_isee_induction_cal_resp,site='gak',nbox=8192,nshift=1024
;plot uncalibrated and calibrated frequency-time spectrogram
tplot,['isee_induction_db_dt_gak_x_dpwrspc','isee_induction_db_dt_gak_x_dpwrspc_corr']
HISTORY:
2018-03-22: Initial release by Satoshi Kurita (ISEE, Nagoya U., kurita@isee.nagoya-u.ac.jp)
$LastChangedDate: 2019-10-23 14:19:14 -0700 (Wed, 23 Oct 2019) $
$LastChangedRevision: 27922 $
(See projects/erg/ground/geomag/isee_induction_cal_resp.pro)