This page was created by the IDL library routine
mk_html_help2.
Last modified: Thu Aug 6 12:53:14 2020.
PROCEDURE: rbsp_load_rbspice
PURPOSE: Loads RBSP RBSPICE data.
KEYWORDS:
probe: RBSP spacecraft indicator [Options: 'a' (default), 'b']
trange: (Optional) Time range of interest (2 element array); if not set, the default is to prompt the user
datatype: RBSPICE data type ['EBR','ESRHELT','ESRLEHT','IBR','ISBR','ISRHELT','TOFxEH' (default),'TOFxEIon','TOFxEnonH','TOFxPHHHELT','TOFxPHHLEHT'],
but change for different data levels.
level: data level ['l1','l2','l3' (default),'l3pap']
downloadonly: download file but don't read it or load tplot variables
get_support_data: when set this routine will load any support data;
support data (such as energy range, PA range, etc.) is specified in the CDF file
time_clip: clip the data to the requested time range; note that if you
do not use this keyword, you may load a longer time range than requested
varformat: should be a string (wildcards accepted) that will match the CDF variables
that should be loaded into tplot variables
files: named varible for output of pathnames of local files
verbose: set to enable useful outputs for debugging
EXAMPLE:
rbsp_load_rbspice, probe='b', level='l3', datatype='TOFxEH', trange=['2015-10-01/12:00','2015-10-01/18:00'], /time_clip, /get_support_data
REVISION HISTORY:
+ ?,? : Original from rbsp_load_emfisis.pro
+ 2013-03, K. Min : ?
+ 2014-04, K. Keika : ?
+ 2016-12-08, I. Cohen :defined L3 and L3PAP datatypes; added trange to rbsp_load_rbspice_read call; added omni-directional calculation and spin-averaging through calls to separate routines
$LastChangedBy: egrimes $
$LastChangedDate: 2017-03-03 08:56:11 -0800 (Fri, 03 Mar 2017) $
$LastChangedRevision: 22905 $
$URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/tags/spedas_4_0/general/missions/rbsp/rbspice/rbsp_load_rbspice.pro $
(See general/missions/rbsp/rbspice/rbsp_load_rbspice.pro)
RBSP RBSPICE crib sheet
prime RBSPICE scientific products are:
TOFxEH proton spectra
TOFxEnonH helium spectra
TOFxEnonH oxygen spectra
TOFxPHHHELT proton spectra
TOFxPHHHELT oxygen spectra
$LastChangedBy: egrimes $
$LastChangedDate: 2017-03-03 08:08:58 -0800 (Fri, 03 Mar 2017) $
$LastChangedRevision: 22902 $
$URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/tags/spedas_4_0/general/missions/rbsp/rbspice/rbsp_load_rbspice_crib.pro $
(See general/missions/rbsp/rbspice/rbsp_load_rbspice_crib.pro)
PROCEDURE: RBSP_LOAD_RBSPICE_READ
PURPOSE: Works on previously loaded RBSPICE tplot variables: adds energy channel energy values to primary data variable, separates non-H species variables,
creates variables for individual telescopes, and sets appropriate tplot options
KEYWORDS:
probe: RBSP spacecraft indicator [Options: 'a' (default), 'b']
datatype: RBSPICE data type ['EBR','ESRHELT','ESRLEHT','IBR','ISBR','ISRHELT','TOFxEH' (default),'TOFxEIon','TOFxEnonH','TOFxPHHHELT','TOFxPHHLEHT'],
but change for different data levels.
species: particle species ['proton' (default),'helium','oxygen', or 'ions']
tplotnames: This does not need to be defined, will load all previously loaded tplot variables
level: data level ['l1','l2','l3' (default),'l3pap']
REVISION HISTORY:
+ ?, D. Turner, M. Gkioulidou, K. Keika, : created with cdf reader provided by H. Korth.
+ 2013-04, K. Keika : ?
+ 2016-09-12, I. Cohen : added trange keyword and introduced into call to rbsp_load_emphisis; commented out load and analysis of emphisis data
+ 2017-02-21, I. Cohen : reconfigured redefinition of '*_F*DU' variables to separate oxygen and helium; defined species and yticks variables for y-axis labeling;
changed yrange and zrange limits
$LastChangedBy: egrimes $
$LastChangedDate: 2017-03-03 08:51:35 -0800 (Fri, 03 Mar 2017) $
$LastChangedRevision: 22904 $
$URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/tags/spedas_4_0/general/missions/rbsp/rbspice/rbsp_load_rbspice_read.pro $
(See general/missions/rbsp/rbspice/rbsp_load_rbspice_read.pro)
PROCEDURE: rbsp_rbspice_config
PURPOSE: This procedure serves as the RBSP RBSPICE configuration file. It sets global (system) variables and initializes devices
This procedure will define the location of data files and the data server.
This procedure is intended to be called from within the "RBSP_RBSPICE_INIT" procedure.
This should be the only RBSP RBSPICE file that requires modification for use in different locations.
Settings in this file will be overridden by settings in the environment.
(see setup_themis or setup_themis_bash for examples of setting environment
variables on UNIX-like systems. The environment can also be set on Windows
systems.)
KEYWORDS
no_color_setup: do not set colors if already taken care of
REVISION HISTORY:
+ ?, ? : created from rbsp_emfisis_config.pro
+ Mar 2013, K. Min : ?
$LastChangedBy: egrimes $
$LastChangedDate: 2017-03-03 08:08:58 -0800 (Fri, 03 Mar 2017) $
$LastChangedRevision: 22902 $
$URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/tags/spedas_4_0/general/missions/rbsp/rbspice/rbsp_rbspice_config.pro $
(See general/missions/rbsp/rbspice/rbsp_rbspice_config.pro)
PROCEDURE: rbsp_rbspice_init
PURPOSE: Initializes system variables for RBSP RBSPICE. Can be called from idl_startup to set custom locations.
The system variable !RBSP_RBSPICE is defined here. The elements of this structure are explained below:
!RBSP_RBSPICE.LOCAL_DATA_DIR This is the root location for all RBSP RBSPICE data files.
The RBSP RBSPICE software expects all data files to reside in specific subdirectories relative
to this root directory.;
!RBSP_RBSPICE.REMOTE_DATA_DIR This is the URL of the server that can provide the data files.
(default is: "http://themis.ssl.berkeley.edu/data/themis/")
if the software does not find a needed file in LOCAL_DATA_DIR,
then it will attempt to download the data from the URL and REMOTE_DATA_DIR is defined,
the software will attempt to download the file from REMOTE_DATA_DIR, place it in LOCAL_DATA_DIR
with the same relative pathname, and then continue processing.
KEYWORDS:
reset: Reset !rbsp_rbspice to values in environment (or values in keywords).
local_data_dir: use given value for local_data_dir, rather than environment. Only works on
initial call or reset.
remote_data_dir: Use given value for remote_data_dir, rather than environment. Only works on inital
call or reset.
no_color_setup: do not set colors if already taken care of
REVISION HISTORY:
+ ?, ? : created from rbsp_emfisis_init.pro
+ Mar 2013, K. Min : ?
+ 2016-12-08, I. Cohen : updated mission start time
$LastChangedBy: egrimes $
$LastChangedDate: 2017-03-03 08:08:58 -0800 (Fri, 03 Mar 2017) $
$LastChangedRevision: 22902 $
$URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/tags/spedas_4_0/general/missions/rbsp/rbspice/rbsp_rbspice_init.pro $
(See general/missions/rbsp/rbspice/rbsp_rbspice_init.pro)
PROCEDURE:
rbsp_rbspice_omni
PURPOSE:
Calculates the omni-directional flux for all 6 telescopes
KEYWORDS:
probe: RBSP spacecraft indicator [Options: 'a' (default), 'b']
datatype: RBSPICE data type ['EBR','ESRHELT','ESRLEHT','IBR','ISBR','ISRHELT','TOFxEH' (default),'TOFxEIon','TOFxEnonH','TOFxPHHHELT','TOFxPHHLEHT'],
but change for different data levels.
tplotnames: This does not need to be defined, will load all previously loaded tplot variables
level: data level ['l1','l2','l3' (default),'l3pap']
REVISION HISTORY:
+ 2016-12-09, I. Cohen : created based on mms_eis_omni.pro; added level keyword; removed data_units and data_rate keywords
+ 2017-02-21, I. Cohen : defined species variable for y-axis labeling
$LastChangedBy: egrimes $
$LastChangedDate: 2017-03-03 08:08:58 -0800 (Fri, 03 Mar 2017) $
$LastChangedRevision: 22902 $
$URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/tags/spedas_4_0/general/missions/rbsp/rbspice/rbsp_rbspice_omni.pro $
(See general/missions/rbsp/rbspice/rbsp_rbspice_omni.pro)
PROCEDURE:
rbsp_rbspice_pad
PURPOSE:
Calculate pitch angle distributions using data from the
RBSP Radiation Belt Storm Probes Ion Composition Experiment (RBSPICE)
KEYWORDS:
probe: RBSP spacecraft indicator [Options: 'a' (default), 'b']
trange: Time range of interest (2 element array); if not set, the default is to prompt the user
datatype: desired data type [Options: 'TOFxEH' (default), 'TOFxEnonH']
level: data level ['l1','l2','l3' (default),'l3pap']
energy: user-defined energy range to include in the calculation in keV [default = [0,1000]]
bin_size: desired size of the pitch angle bins in degrees [default = 15]
scopes: string array of telescopes to be included in PAD [0-5, default is all]
EXAMPLES:
OUTPUT:
NOTES:
This was written by Brian Walsh; minor modifications by egrimes@igpp and Ian Cohen (APL)
REVISION HISTORY:
+ 2017-02-22, I. Cohen : created based on mms_eis_pad.pro, edited to handle omni-directional or single telescope
$LastChangedBy: egrimes $
$LastChangedDate: 2017-03-03 08:08:58 -0800 (Fri, 03 Mar 2017) $
$LastChangedRevision: 22902 $
$URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/tags/spedas_4_0/general/missions/rbsp/rbspice/rbsp_rbspice_pad.pro $
(See general/missions/rbsp/rbspice/rbsp_rbspice_pad.pro)
PROCEDURE:
rbsp_rbspice_pad_spinavg
PURPOSE:
Calculates spin-averaged PADs for the RBSPICE instrument
KEYWORDS:
probe: RBSP spacecraft indicator [Options: 'a' (default), 'b']
datatype: desired data type [Options: 'TOFxEH' (default), 'TOFxEnonH']
level: data level ['l1','l2','l3' (default),'l3pap']
species: desired ion species [Options: 'proton' (default), 'helium', 'oxygen']
energy: user-defined energy range to include in the calculation in keV [default = [0,1000]]
bin_size: desired size of the pitch angle bins in degrees [default = 15]
scopes: string array of telescopes to be included in PAD [0-5, default is all]
OUTPUT:
REVISION HISTORY:
+ 2017-02-22, I. Cohen : created based on mms_eis_pad_spinavg.pro and tailored to work with rbsp_rbspice_pad.pro
$LastChangedBy: egrimes $
$LastChangedDate: 2017-03-03 08:08:58 -0800 (Fri, 03 Mar 2017) $
$LastChangedRevision: 22902 $
$URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/tags/spedas_4_0/general/missions/rbsp/rbspice/rbsp_rbspice_pad_spinavg.pro $
(See general/missions/rbsp/rbspice/rbsp_rbspice_pad_spinavg.pro)
NAME: rbsp_rbspice_read_config PURPOSE: Reads the RBSP RBSPICE file $LastChangedBy: egrimes $ $LastChangedDate: 2017-03-03 08:32:27 -0800 (Fri, 03 Mar 2017) $ $LastChangedRevision: 22903 $ $URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/tags/spedas_4_0/general/missions/rbsp/rbspice/rbsp_rbspice_read_config.pro $
(See general/missions/rbsp/rbspice/rbsp_rbspice_read_config.pro)
PROCEDURE:
rbsp_rbspice_spin_avg
PURPOSE:
Calculates spin-averaged fluxes for the RBSPICE instrument
KEYWORDS:
probe: RBSP spacecraft indicator [Options: 'a' (default), 'b']
datatype: RBSPICE data type ['TOFxEH' (default),'TOFxEnonH'],
tplotnames: This does not need to be defined, will load all previously loaded tplot variables
level: data level ['l1','l2','l3' (default),'l3pap']
REVISION HISTORY:
+ 2016-12-09, I. Cohen : created based on mms_eis_spin_avg.pro
+ 2017-02-21, I. Cohen : removed species keyword; defined species variable for y-axis labeling
$LastChangedBy: egrimes $
$LastChangedDate: 2017-03-03 08:08:58 -0800 (Fri, 03 Mar 2017) $
$LastChangedRevision: 22902 $
$URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/tags/spedas_4_0/general/missions/rbsp/rbspice/rbsp_rbspice_spin_avg.pro $
(See general/missions/rbsp/rbspice/rbsp_rbspice_spin_avg.pro)