This page was created by the IDL library routine
mk_html_help2
.
Last modified: Fri Sep 19 14:20:01 2014.
FUNCTION: agyro_3d_new(dat,ENERGY=en,ERANGE=er,EBINS=ebins,ANGLE=an,ARANGE=ar,BINS=bins) INPUT: dat: structure, 3d data structure filled by, for example, get_th?_peef.pro KEYWORDS ENERGY: fltarr(2), optional, min,max energy range for integration ERANGE: fltarr(2), optional, min,max energy bin numbers for integration EBINS: bytarr(na), optional, energy bins array for integration 0,1=exclude,include, na = dat.nenergy ANGLE: fltarr(2,2), optional, angle range for integration theta min,max (0,0),(1,0) -90<theta<90 phi min,max (0,1),(1,1) 0<phi<360 ARANGE: fltarr(2), optional, min,max angle bin numbers for integration BINS: bytarr(nb), optional, angle bins array for integration 0,1=exclude,include, nb = dat.ntheta BINS: bytarr(na,nb), optional, energy/angle bins array for integration 0,1=exclude,include PURPOSE: Returns the agyrotropy, 2.(Pxx-Pyy)/(Pxx+Pyy) NOTES: Function normally called by "get_3dt" or "get_2dt" to generate time series data for "tplot.pro". CREATED BY: J.McFadden 00-2-24 LAST MODIFICATION:
(See projects/themis/spacecraft/particles/ESA/packet/functions/agyro_3d_new.pro)
FUNCTION: beta_3d_new(dat,ENERGY=en,ERANGE=er,EBINS=ebins,ANGLE=an,ARANGE=ar,BINS=bins) INPUT: dat: structure, 3d data structure KEYWORDS ENERGY: fltarr(2), optional, min,max energy range for integration ERANGE: fltarr(2), optional, min,max energy bin numbers for integration EBINS: bytarr(na), optional, energy bins array for integration 0,1=exclude,include, na = dat.nenergy ANGLE: fltarr(2,2), optional, angle range for integration theta min,max (0,0),(1,0) -90<theta<90 phi min,max (0,1),(1,1) 0<phi<360 ARANGE: fltarr(2), optional, min,max angle bin numbers for integration BINS: bytarr(nb), optional, angle bins array for integration 0,1=exclude,include, nb = dat.ntheta BINS: bytarr(na,nb), optional, energy/angle bins array for integration 0,1=exclude,include PURPOSE: Returns beta, P/B^2/8pi, corrects for spacecraft potential if dat.sc_pot exists NOTES: Function normally called by "get_3dt" or "get_2dt" to generate time series data for "tplot.pro". CREATED BY: J.McFadden 07-4-29 LAST MODIFICATION:
(See projects/themis/spacecraft/particles/ESA/packet/functions/beta_3d_new.pro)
FUNCTION: dje_3d_new(dat,ENERGY=en,ERANGE=er,EBINS=ebins,ANGLE=an,ARANGE=ar,BINS=bins) INPUT: dat: structure, 3d data structure filled by get_eesa_surv, get_eesa_burst, etc. KEYWORDS ENERGY: fltarr(2), optional, min,max energy range for integration ERANGE: fltarr(2), optional, min,max energy bin numbers for integration EBINS: bytarr(na), optional, energy bins array for integration 0,1=exclude,include, na = dat.nenergy ANGLE: fltarr(2,2), optional, angle range for integration theta min,max (0,0),(1,0) -90<theta<90 phi min,max (0,1),(1,1) 0<phi<360 ARANGE: fltarr(2), optional, min,max angle bin numbers for integration BINS: bytarr(nb), optional, angle bins array for integration 0,1=exclude,include, nb = dat.ntheta BINS: bytarr(na,nb), optional, energy/angle bins array for integration 0,1=exclude,include PURPOSE: Returns the energy flux error due to statistics, [dJEx,dJEy,dJEz], eV/(cm^2-s) NOTES: Function normally called by "get_3dt" or "get_2dt" to generate time series data for "tplot.pro". CREATED BY: J.McFadden 10-03-14 LAST MODIFICATION:
(See projects/themis/spacecraft/particles/ESA/packet/functions/dje_3d_new.pro)
FUNCTION: dj_3d_new(dat,ENERGY=en,ERANGE=er,EBINS=ebins,ANGLE=an,ARANGE=ar,BINS=bins) INPUT: dat: structure, 2d data structure filled by get_eesa_surv, get_eesa_burst, etc. KEYWORDS ENERGY: fltarr(2), optional, min,max energy range for integration ERANGE: fltarr(2), optional, min,max energy bin numbers for integration EBINS: bytarr(na), optional, energy bins array for integration 0,1=exclude,include, na = dat.nenergy ANGLE: fltarr(2,2), optional, angle range for integration theta min,max (0,0),(1,0) -90<theta<90 phi min,max (0,1),(1,1) 0<phi<360 ARANGE: fltarr(2), optional, min,max angle bin numbers for integration BINS: bytarr(nb), optional, angle bins array for integration 0,1=exclude,include, nb = dat.ntheta BINS: bytarr(na,nb), optional, energy/angle bins array for integration 0,1=exclude,include PURPOSE: Returns the flux error due to statistics, [dJx,dJy,dJz], 1/(cm^2-s) NOTES: Function normally called by "get_3dt" or "get_2dt" to generate time series data for "tplot.pro". CREATED BY: J.McFadden 10-03-13 LAST MODIFICATION:
(See projects/themis/spacecraft/particles/ESA/packet/functions/dj_3d_new.pro)
FUNCTION: dm_3d_new(dat,ENERGY=en,ERANGE=er,EBINS=ebins,ANGLE=an,ARANGE=ar,BINS=bins) INPUT: dat: structure, 3d data structure filled by themis routines get_th?_p??? KEYWORDS ENERGY: fltarr(2), optional, min,max energy range for integration ERANGE: fltarr(2), optional, min,max energy bin numbers for integration EBINS: bytarr(na), optional, energy bins array for integration 0,1=exclude,include, na = dat.nenergy ANGLE: fltarr(2,2), optional, angle range for integration theta min,max (0,0),(1,0) -90<theta<90 phi min,max (0,1),(1,1) 0<phi<360 ARANGE: fltarr(2), optional, min,max angle bin numbers for integration BINS: bytarr(nb), optional, angle bins array for integration 0,1=exclude,include, nb = dat.ntheta BINS: bytarr(na,nb), optional, energy/angle bins array for integration 0,1=exclude,include PURPOSE: Returns the momentum tensor, [Mxx,Myy,Mzz,Mxy,Mxz,Myz], eV/cm^3 NOTES: Function normally called by "get_3dt" or "get_2dt" to generate time series data for "tplot.pro". CREATED BY: J.McFadden 10-03-13 LAST MODIFICATION:
(See projects/themis/spacecraft/particles/ESA/packet/functions/dm_3d_new.pro)
FUNCTION: dn_3d_new(dat,ENERGY=en,ERANGE=er,EBINS=ebins,ANGLE=an,ARANGE=ar,BINS=bins) INPUT: dat: structure, 2d data structure filled by get_eesa_surv, get_eesa_burst, etc. KEYWORDS ENERGY: fltarr(2), optional, min,max energy range for integration ERANGE: fltarr(2), optional, min,max energy bin numbers for integration EBINS: bytarr(na), optional, energy bins array for integration 0,1=exclude,include, na = dat.nenergy ANGLE: fltarr(2,2), optional, angle range for integration theta min,max (0,0),(1,0) -90<theta<90 phi min,max (0,1),(1,1) 0<phi<360 ARANGE: fltarr(2), optional, min,max angle bin numbers for integration BINS: bytarr(nb), optional, angle bins array for integration 0,1=exclude,include, nb = dat.ntheta BINS: bytarr(na,nb), optional, energy/angle bins array for integration 0,1=exclude,include PURPOSE: Returns the density error due to statistics, dn, 1/cm^3, corrects for spacecraft potential if dat.sc_pot exists NOTES: Function normally called by "get_3dt" or "get_2dt" to generate time series data for "tplot.pro". CREATED BY: J.McFadden 10-03-09 LAST MODIFICATION:
(See projects/themis/spacecraft/particles/ESA/packet/functions/dn_3d_new.pro)
FUNCTION: p_3d_new(dat,ENERGY=en,ERANGE=er,EBINS=ebins,ANGLE=an,ARANGE=ar,BINS=bins) INPUT: dat: structure, 2d data structure filled by get_eesa_surv, get_eesa_burst, etc. KEYWORDS ENERGY: fltarr(2), optional, min,max energy range for integration ERANGE: fltarr(2), optional, min,max energy bin numbers for integration EBINS: bytarr(na), optional, energy bins array for integration 0,1=exclude,include, na = dat.nenergy ANGLE: fltarr(2,2), optional, angle range for integration theta min,max (0,0),(1,0) -90<theta<90 phi min,max (0,1),(1,1) 0<phi<360 ARANGE: fltarr(2), optional, min,max angle bin numbers for integration BINS: bytarr(nb), optional, angle bins array for integration 0,1=exclude,include, nb = dat.ntheta BINS: bytarr(na,nb), optional, energy/angle bins array for integration 0,1=exclude,include PURPOSE: Returns the pressure error due to statistics, dp, eV/cm^3, corrects for spacecraft potential if dat.sc_pot exists, diagonalizes NOTES: Function normally called by "get_3dt" or "get_2dt" to generate time series data for "tplot.pro". CREATED BY: J.McFadden 00-2-24 LAST MODIFICATION: J.McFadden 05-2-8 Fixed diagonalization J.McFadden 06-2-23 changed the s/c pot calculation to the same as n_2d_new.pro J.McFadden 09-4-29 added a diagonalization to Pxx and Pyy to maximize difference
(See projects/themis/spacecraft/particles/ESA/packet/functions/dp_3d_new.pro)
FUNCTION: dv_3d_new(dat,ENERGY=en,ERANGE=er,EBINS=ebins,ANGLE=an,ARANGE=ar,BINS=bins) INPUT: dat: structure, 2d data structure filled by get_eesa_surv, get_eesa_burst, etc. KEYWORDS ENERGY: fltarr(2), optional, min,max energy range for integration ERANGE: fltarr(2), optional, min,max energy bin numbers for integration EBINS: bytarr(na), optional, energy bins array for integration 0,1=exclude,include, na = dat.nenergy ANGLE: fltarr(2,2), optional, angle range for integration theta min,max (0,0),(1,0) -90<theta<90 phi min,max (0,1),(1,1) 0<phi<360 ARANGE: fltarr(2), optional, min,max angle bin numbers for integration BINS: bytarr(nb), optional, angle bins array for integration 0,1=exclude,include, nb = dat.ntheta BINS: bytarr(na,nb), optional, energy/angle bins array for integration 0,1=exclude,include PURPOSE: Returns the velocity error due to statistics, [dVx,dVy,dVz], km/s NOTES: Function normally called by "get_3dt" or "get_2dt" to generate time series data for "tplot.pro". CREATED BY: J.McFadden 10-03-13 LAST MODIFICATION:
(See projects/themis/spacecraft/particles/ESA/packet/functions/dv_3d_new.pro)
FUNCTION: ec_3d_new((dat,ENERGY=en,ERANGE=er,EBINS=ebins,ANGLE=an,ARANGE=ar,BINS=bins) INPUT: dat: structure, 2d data structure filled by get_eesa_surv, get_eesa_burst, etc. KEYWORDS ENERGY: fltarr(2), optional, min,max energy range for integration ERANGE: fltarr(2), optional, min,max energy bin numbers for integration EBINS: bytarr(na), optional, energy bins array for integration 0,1=exclude,include, na = dat.nenergy ANGLE: fltarr(2), optional, min,max pitch angle range for integration ARANGE: fltarr(2), optional, min,max angle bin numbers for integration BINS: bytarr(nb), optional, angle bins array for integration 0,1=exclude,include, nb = dat.ntheta BINS: bytarr(na,nb), optional, energy/angle bins array for integration 0,1=exclude,include PURPOSE: Returns the characteristic energy, Ec, eV NOTES: Function calls jo_3d.pro and jeo_3d.pro Function normally called by "get_2dt.pro" to generate time series data for "tplot.pro". CREATED BY: J.McFadden 09-06-11 LAST MODIFICATION:
(See projects/themis/spacecraft/particles/ESA/packet/functions/ec_3d_new.pro)
PROCEDURE: get_pa_spec3d PURPOSE: Generates pitch angle vs. time spectrogram data structures for tplot INPUT: get_dat, a string that defines the 'routine' that returns a 2D or 3D data structure if 'probe' keyword set, assumes routine = get_dat if 'probe' keyword is not set, assumes routine = 'get_'+ get_dat unless get_dat already includes 'get_', in which case routine = get_dat for example, get_dat='thc_peir' then routine = 'get_thc_peir' for example, get_dat='thm_sst_pser' then routine = 'thm_sst_pser' KEYWORDS: T1: start time, seconds since 1970 T2: end time, seconds since 1970 ENERGY: fltarr(2) energy range to sum over ERANGE: intarr(2) energy bin range to sum over EBINS: bytarr(dat.nenergy) energy bins to sum over gap_time: time gap big enough to signify a data gap (default 200 sec, 8 sec for FAST) NO_DATA: returns 1 if no_data else returns 0 UNITS: convert to these units if included NAME: New name of the Data Quantity BKG: A 3d data structure containing the background counts. FLOOR: Sets the minimum value of any data point to sqrt(bkg). MISSING: Value for bad data. RETRACE: Set to number of retrace energy steps to be eliminated starting at energy step 0 CALIB: Calib keyword passed on to get_"get_dat"_ts EWEIGHT Weights the energy bin average by bin energy width. SHIFT90 If set true, pitch angle range is -90 to 270 CREATED BY: J.McFadden 08-07-07 VERSION: 1 LAST MODIFICATION: 09-01- MOD HISTORY: 09-01-08 bkg keyword changed to work for Themis electron sst 09-01-08 probe keyword added for themis sst routines 09-01-08 changed loop to use index to allow for dat.valid=0 data in stored data 09-01-08 calib keyword no longer passed to routine NOTES: Modified from get_pa_spec.pro used for 2-D data structures for FAST or Cluster/PEACE get_pa_spec3d.pro converts 3-D data structures two 2D pitch angle data
(See projects/themis/spacecraft/particles/ESA/packet/functions/get_pa_spec3d.pro)
FUNCTION: jeo_3d_new(dat,ENERGY=en,ERANGE=er,EBINS=ebins,ANGLE=an,ARANGE=ar,BINS=bins) INPUT: dat: structure, 2d data structure filled by get_eesa_surv, get_eesa_burst, etc. KEYWORDS ENERGY: fltarr(2), optional, min,max energy range for integration ERANGE: fltarr(2), optional, min,max energy bin numbers for integration EBINS: bytarr(na), optional, energy bins array for integration 0,1=exclude,include, na = dat.nenergy ANGLE: fltarr(2,2), optional, angle range for integration theta min,max (0,0),(1,0) -90<theta<90 phi min,max (0,1),(1,1) 0<phi<360 ARANGE: fltarr(2), optional, min,max angle bin numbers for integration BINS: bytarr(nb), optional, angle bins array for integration 0,1=exclude,include, nb = dat.ntheta BINS: bytarr(na,nb), optional, energy/angle bins array for integration 0,1=exclude,include PURPOSE: Returns the omin directional energy flux, eV/(cm^2-s) NOTES: Function normally called by "get_3dt" or "get_2dt" to generate time series data for "tplot.pro". CREATED BY: J.McFadden 09-06-11 LAST MODIFICATION: J.McFadden 09-06-18 calculates domega, no longer requires dat.domega to exist
(See projects/themis/spacecraft/particles/ESA/packet/functions/jeo_3d_new.pro)
FUNCTION: je_3d_new(dat,ENERGY=en,ERANGE=er,EBINS=ebins,ANGLE=an,ARANGE=ar,BINS=bins) INPUT: dat: structure, 3d data structure filled by get_eesa_surv, get_eesa_burst, etc. KEYWORDS ENERGY: fltarr(2), optional, min,max energy range for integration ERANGE: fltarr(2), optional, min,max energy bin numbers for integration EBINS: bytarr(na), optional, energy bins array for integration 0,1=exclude,include, na = dat.nenergy ANGLE: fltarr(2,2), optional, angle range for integration theta min,max (0,0),(1,0) -90<theta<90 phi min,max (0,1),(1,1) 0<phi<360 ARANGE: fltarr(2), optional, min,max angle bin numbers for integration BINS: bytarr(nb), optional, angle bins array for integration 0,1=exclude,include, nb = dat.ntheta BINS: bytarr(na,nb), optional, energy/angle bins array for integration 0,1=exclude,include PURPOSE: Returns the energy flux, [JEx,JEy,JEz], ergs/(cm^2-s) NOTES: Function normally called by "get_3dt" or "get_2dt" to generate time series data for "tplot.pro". CREATED BY: J.McFadden 02-9-13 LAST MODIFICATION: J.McFadden 10-03-13 for e-, throws away bin contaminated by photo-e J.McFadden 10-03-13 for e-, extrapolates to fill in distribution at low energies, for i+ throws away low energy bins as s/c potential grows J.McFadden 10-03-13 for e-, allows choice of log or linear extrapolation
(See projects/themis/spacecraft/particles/ESA/packet/functions/je_3d_new.pro)
FUNCTION: je_3d_new(dat,ENERGY=en,ERANGE=er,EBINS=ebins,ANGLE=an,ARANGE=ar,BINS=bins) INPUT: dat: structure, 3d data structure filled by get_eesa_surv, get_eesa_burst, etc. KEYWORDS ENERGY: fltarr(2), optional, min,max energy range for integration ERANGE: fltarr(2), optional, min,max energy bin numbers for integration EBINS: bytarr(na), optional, energy bins array for integration 0,1=exclude,include, na = dat.nenergy ANGLE: fltarr(2,2), optional, angle range for integration theta min,max (0,0),(1,0) -90<theta<90 phi min,max (0,1),(1,1) 0<phi<360 ARANGE: fltarr(2), optional, min,max angle bin numbers for integration BINS: bytarr(nb), optional, angle bins array for integration 0,1=exclude,include, nb = dat.ntheta BINS: bytarr(na,nb), optional, energy/angle bins array for integration 0,1=exclude,include PURPOSE: Returns the energy flux, [JEx,JEy,JEz], 1/(cm^2-s) NOTES: Function normally called by "get_3dt" or "get_2dt" to generate time series data for "tplot.pro". CREATED BY: J.McFadden 02-9-13 LAST MODIFICATION:
(See projects/themis/spacecraft/particles/ESA/packet/functions/je_par_3d_new.pro)
FUNCTION: jo_3d_new(dat,ENERGY=en,ERANGE=er,EBINS=ebins,ANGLE=an,ARANGE=ar,BINS=bins) INPUT: dat: structure, 2d data structure filled by get_eesa_surv, get_eesa_burst, etc. KEYWORDS ENERGY: fltarr(2), optional, min,max energy range for integration ERANGE: fltarr(2), optional, min,max energy bin numbers for integration EBINS: bytarr(na), optional, energy bins array for integration 0,1=exclude,include, na = dat.nenergy ANGLE: fltarr(2,2), optional, angle range for integration theta min,max (0,0),(1,0) -90<theta<90 phi min,max (0,1),(1,1) 0<phi<360 ARANGE: fltarr(2), optional, min,max angle bin numbers for integration BINS: bytarr(nb), optional, angle bins array for integration 0,1=exclude,include, nb = dat.ntheta BINS: bytarr(na,nb), optional, energy/angle bins array for integration 0,1=exclude,include PURPOSE: Returns the omin directional flux, 1/(cm^2-s) NOTES: Function normally called by "get_3dt" or "get_2dt" to generate time series data for "tplot.pro". CREATED BY: J.McFadden 07-09-06 LAST MODIFICATION: J.McFadden 09-06-18 calculates domega, no longer requires dat.domega to exist
(See projects/themis/spacecraft/particles/ESA/packet/functions/jo_3d_new.pro)
FUNCTION: j_3d_new(dat,ENERGY=en,ERANGE=er,EBINS=ebins,ANGLE=an,ARANGE=ar,BINS=bins) INPUT: dat: structure, 2d data structure filled by get_eesa_surv, get_eesa_burst, etc. KEYWORDS ENERGY: fltarr(2), optional, min,max energy range for integration ERANGE: fltarr(2), optional, min,max energy bin numbers for integration EBINS: bytarr(na), optional, energy bins array for integration 0,1=exclude,include, na = dat.nenergy ANGLE: fltarr(2,2), optional, angle range for integration theta min,max (0,0),(1,0) -90<theta<90 phi min,max (0,1),(1,1) 0<phi<360 ARANGE: fltarr(2), optional, min,max angle bin numbers for integration BINS: bytarr(nb), optional, angle bins array for integration 0,1=exclude,include, nb = dat.ntheta BINS: bytarr(na,nb), optional, energy/angle bins array for integration 0,1=exclude,include PURPOSE: Returns the flux, [Jx,Jy,Jz], 1/(cm^2-s) NOTES: Function normally called by "get_3dt" or "get_2dt" to generate time series data for "tplot.pro". CREATED BY: J.McFadden 00-2-24 LAST MODIFICATION: J.McFadden 10-03-13 for e-, throws away bin contaminated by photo-e J.McFadden 10-03-13 for e-, extrapolates to fill in distribution at low energies, for i+ throws away low energy bins as s/c potential grows J.McFadden 10-03-13 for e-, allows choice of log or linear extrapolation
(See projects/themis/spacecraft/particles/ESA/packet/functions/j_3d_new.pro)
FUNCTION: ld_3d_new(dat,ENERGY=en,ERANGE=er,EBINS=ebins,ANGLE=an,ARANGE=ar,BINS=bins) INPUT: dat: structure, 2d data structure filled by get_eesa_surv, get_eesa_burst, etc. KEYWORDS ENERGY: fltarr(2), optional, min,max energy range for integration ERANGE: fltarr(2), optional, min,max energy bin numbers for integration EBINS: bytarr(na), optional, energy bins array for integration 0,1=exclude,include, na = dat.nenergy ANGLE: fltarr(2,2), optional, angle range for integration theta min,max (0,0),(1,0) -90<theta<90 phi min,max (0,1),(1,1) 0<phi<360 ARANGE: fltarr(2), optional, min,max angle bin numbers for integration BINS: bytarr(nb), optional, angle bins array for integration 0,1=exclude,include, nb = dat.ntheta BINS: bytarr(na,nb), optional, energy/angle bins array for integration 0,1=exclude,include PURPOSE: Returns the debye length, m, corrects for spacecraft potential if dat.sc_pot exists NOTES: Function normally called by "get_3dt" or "get_2dt" to generate time series data for "tplot.pro". CREATED BY: J.McFadden 07-11-28 LAST MODIFICATION:
(See projects/themis/spacecraft/particles/ESA/packet/functions/ld_3d_new.pro)
FUNCTION: m_3d_new(dat,ENERGY=en,ERANGE=er,EBINS=ebins,ANGLE=an,ARANGE=ar,BINS=bins) INPUT: dat: structure, 3d data structure filled by themis routines get_th?_p??? KEYWORDS ENERGY: fltarr(2), optional, min,max energy range for integration ERANGE: fltarr(2), optional, min,max energy bin numbers for integration EBINS: bytarr(na), optional, energy bins array for integration 0,1=exclude,include, na = dat.nenergy ANGLE: fltarr(2,2), optional, angle range for integration theta min,max (0,0),(1,0) -90<theta<90 phi min,max (0,1),(1,1) 0<phi<360 ARANGE: fltarr(2), optional, min,max angle bin numbers for integration BINS: bytarr(nb), optional, angle bins array for integration 0,1=exclude,include, nb = dat.ntheta BINS: bytarr(na,nb), optional, energy/angle bins array for integration 0,1=exclude,include PURPOSE: Returns the momentum tensor, [Mxx,Myy,Mzz,Mxy,Mxz,Myz], eV/cm^3 NOTES: Function normally called by "get_3dt" or "get_2dt" to generate time series data for "tplot.pro". CREATED BY: J.McFadden 08-7-21 LAST MODIFICATION: J.McFadden 10-03-13 for e-, throws away bin contaminated by photo-e J.McFadden 10-03-13 for e-, extrapolates to fill in distribution at low energies, for i+ throws away low energy bins as s/c potential grows J.McFadden 10-03-13 for e-, allows choice of log or linear extrapolation
(See projects/themis/spacecraft/particles/ESA/packet/functions/m_3d_new.pro)
FUNCTION: n_3d_new(dat,ENERGY=en,ERANGE=er,EBINS=ebins,ANGLE=an,ARANGE=ar,BINS=bins) INPUT: dat: structure, 2d data structure filled by get_eesa_surv, get_eesa_burst, etc. KEYWORDS ENERGY: fltarr(2), optional, min,max energy range for integration ERANGE: fltarr(2), optional, min,max energy bin numbers for integration EBINS: bytarr(na), optional, energy bins array for integration 0,1=exclude,include, na = dat.nenergy ANGLE: fltarr(2,2), optional, angle range for integration theta min,max (0,0),(1,0) -90<theta<90 phi min,max (0,1),(1,1) 0<phi<360 ARANGE: fltarr(2), optional, min,max angle bin numbers for integration BINS: bytarr(nb), optional, angle bins array for integration 0,1=exclude,include, nb = dat.ntheta BINS: bytarr(na,nb), optional, energy/angle bins array for integration 0,1=exclude,include PURPOSE: Returns the density, n, 1/cm^3, corrects for spacecraft potential if dat.sc_pot exists NOTES: Function normally called by "get_3dt" or "get_2dt" to generate time series data for "tplot.pro". CREATED BY: J.McFadden 00-2-24 LAST MODIFICATION: J.McFadden 09-06-12 for e-, throws away bin contaminated by photo-e J.McFadden 09-06-13 for e-, extrapolates to fill in distribution at low energies, for i+ throws away low energy bins as s/c potential grows J.McFadden 10-02-26 for e-, allows choice of log or linear extrapolation
(See projects/themis/spacecraft/particles/ESA/packet/functions/n_3d_new.pro)
FUNCTION: p_3d_new(dat,ENERGY=en,ERANGE=er,EBINS=ebins,ANGLE=an,ARANGE=ar,BINS=bins) INPUT: dat: structure, 2d data structure filled by get_eesa_surv, get_eesa_burst, etc. KEYWORDS ENERGY: fltarr(2), optional, min,max energy range for integration ERANGE: fltarr(2), optional, min,max energy bin numbers for integration EBINS: bytarr(na), optional, energy bins array for integration 0,1=exclude,include, na = dat.nenergy ANGLE: fltarr(2,2), optional, angle range for integration theta min,max (0,0),(1,0) -90<theta<90 phi min,max (0,1),(1,1) 0<phi<360 ARANGE: fltarr(2), optional, min,max angle bin numbers for integration BINS: bytarr(nb), optional, angle bins array for integration 0,1=exclude,include, nb = dat.ntheta BINS: bytarr(na,nb), optional, energy/angle bins array for integration 0,1=exclude,include PURPOSE: Returns the pressure tensor, [Pxx,Pyy,Pzz,Pxy,Pxz,Pyz], eV/cm^3 NOTES: Function normally called by "get_3dt" or "get_2dt" to generate time series data for "tplot.pro". CREATED BY: J.McFadden 00-2-24 LAST MODIFICATION: J.McFadden 05-2-8 Fixed diagonalization J.McFadden 06-2-23 changed the s/c pot calculation to the same as n_2d_new.pro J.McFadden 09-4-29 added a diagonalization to Pxx and Pyy to maximize difference
(See projects/themis/spacecraft/particles/ESA/packet/functions/p_3d_new.pro)
FUNCTION: sst_atten(dat) INPUT: dat: structure, data structure filled by thm_sst_ps** KEYWORDS 0,1=exclude,include PURPOSE: Returns the attenuator value of the structure NOTES: CREATED BY: J.McFadden 09-01-06 LAST MODIFICATION:
(See projects/themis/spacecraft/particles/ESA/packet/functions/sst_atten.pro)
FUNCTION: thm_energy_to_ebin(dat,en) INPUT: dat: structure, 2d data structure filled by get_eesa_surv, get_eesa_burst, etc. en: real,fltarr, real or float array of energy values KEYWORD: BIN int,intarr optional, angle bins corresponding to "en" used when energies depend upon angle bin PURPOSE: Returns the energy bin numbers in "dat.energy" nearest to "en" CREATED BY: J.McFadden LAST MODIFICATION: 96-4-22 J.McFadden 2014-06-30: Adding thm prefix to differentiate from identically named FAST routines $LastChangedBy: aaflores $ $LastChangedDate: 2014-06-30 18:58:14 -0700 (Mon, 30 Jun 2014) $ $LastChangedRevision: 15492 $ $URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/tags/spedas_1_00/projects/themis/spacecraft/particles/ESA/packet/functions/thm_energy_to_ebin.pro $
(See projects/themis/spacecraft/particles/ESA/packet/functions/thm_energy_to_ebin.pro)
PROGRAM: thm_get_2dt,funct,get_dat INPUT: funct: function, function that operates on structures generated by get_eesa_surv, get_eesa_burst, etc. funct = 'n_2d','j_2d','v_2d','p_2d','t_2d', 'vth_2d','ec_2d', or 'je_2d' get_dat, a string that defines the 'routine' that returns a 2D or 3D data structure if 'probe' keyword set, assumes routine = get_dat if 'probe' keyword is not set, assumes routine = 'get_'+ get_dat unless get_dat already includes 'get_', in which case routine = get_dat for example, get_dat='thc_peir' then routine = 'get_thc_peir' for example, get_dat='thm_sst_pser' then routine = 'thm_sst_pser' KEYWORDS T1: real or dbl start time, seconds since 1970 T2: real or dbl end time, seconds since 1970 ENERGY: fltarr(2), optional, min,max energy range for integration ERANGE: fltarr(2), optional, min,max energy bin numbers for integration EBINS: bytarr(na), optional, energy bins array for integration 0,1=exclude,include, na = dat.nenergy ANGLE: fltarr(2), optional, min,max pitch angle range for integration ARANGE: fltarr(2), optional, min,max angle bin numbers for integration BINS: bytarr(nb), optional, angle bins array for integration 0,1=exclude,include, nb = dat.ntheta BINS: bytarr(na,nb), optional, energy/angle bins array for integration GAP_TIME: time gap big enough to signify a data gap (def 200 sec, 8 sec for FAST) NO_DATA: returns 1 if no_data else returns 0 NAME: New name of the Data Quantity Default: funct+'_'+get_dat BKG: A 3d data structure containing the background counts. FLOOR: Sets the minimum value of any data point to sqrt(bkg). MISSING: value for bad data. 0,1=exclude,include CALIB: Calib keyword passed on to get_dat -- no longer used PROBE: probe keyword passed on to get_dat -- used by themis sst routines PURPOSE: To generate time series data for "tplot.pro" NOTES: Program names time series data to funct+"_"+get_dat if NAME keyword not set See 'tplot_names.pro'. CREATED BY: J.McFadden LAST MODIFICATION: 97/03/04 MOD HISTORY: 97/03/04 T1,T2 keywords added 08/07/10 bkg keyword changed to work for Themis ion ESA 08/12/31 bkg keyword changed to work for Themis electron sst 08/12/31 added probe keyword for themis sst calls 09/01/05 changed loop to use index to allow for dat.valid=0 data in stored data 09/01/05 calib keyword no longer passed to routine 09/04/16 bkg keyword removed for Themis electron sst, assume bkg removal is part of get_th?_pse? 2014/06/30 Adding thm prefix to differentiate from identically named FAST routines NOTES: $LastChangedBy: aaflores $ $LastChangedDate: 2014-06-30 18:58:14 -0700 (Mon, 30 Jun 2014) $ $LastChangedRevision: 15492 $ $URL: svn+ssh://thmsvn@ambrosia.ssl.berkeley.edu/repos/spdsoft/tags/spedas_1_00/projects/themis/spacecraft/particles/ESA/packet/functions/thm_get_2dt.pro $
(See projects/themis/spacecraft/particles/ESA/packet/functions/thm_get_2dt.pro)
PROCEDURE: thm_get_en_spec PURPOSE: Generates energy-time spectrogram data structures for tplot INPUT: get_dat, a string that defines the 'routine' that returns a 2D or 3D data structure if 'probe' keyword set, assumes routine = get_dat if 'probe' keyword is not set, assumes routine = 'get_'+ get_dat unless get_dat already includes 'get_', in which case routine = get_dat for example, get_dat='thc_peir' then routine = 'get_thc_peir' for example, get_dat='thm_sst_pser' then routine = 'thm_sst_pser' KEYWORDS: T1: start time, seconds since 1970 T2: end time, seconds since 1970 ANGLE: fltarr(2),fltarr(4) angle range to sum over ARANGE: intarr(2) bin range to sum over BINS: bytarr(dat.nbins) bins to sum over gap_time: time gap big enough to signify a data gap (default 200 sec, 8 sec for FAST) NO_DATA: returns 1 if no_data else returns 0 UNITS: convert to these units if included NAME: New name of the Data Quantity, default = get_dat + '_en_spec' BKG: A 3d data structure containing the background counts If bkg=1, it will run themis background subtraction routine FLOOR: Sets the minimum value of any data point to sqrt(bkg). MISSING: value for bad data. RETRACE: Set to number of retrace energy steps to be eliminated starting at energy step 0 CALIB: Calib keyword passed on to get_dat -- no longer used PROBE: probe keyword passed on to get_dat -- used by themis sst routines CREATED BY: J.McFadden VERSION: 1 LAST MODIFICATION: 97/03/04 MOD HISTORY: 97/03/04 T1,T2 keywords added 97/05/22 CALIB keyword added 08/07/10 bkg keyword changed to work for Themis ion ESA 08/07/10 averaging routine changed to weight different angle bins by dat.gf 08/12/31 bkg keyword changed to work for Themis electron sst 08/12/31 probe keyword added for themis sst routines 09/01/05 changed loop to use index to allow for dat.valid=0 data in stored data 09/01/05 calib keyword no longer passed to routine 09/04/16 bkg keyword removed for Themis electron sst, assume bkg removal is part of get_th?_pse? 2014/06/30 Adding thm prefix to differentiate from identically named FAST routines NOTES: Current version only works for FAST and THEMIS
(See projects/themis/spacecraft/particles/ESA/packet/functions/thm_get_en_spec.pro)
FUNCTION: t_3d_new(dat,ENERGY=en,ERANGE=er,EBINS=ebins,ANGLE=an,ARANGE=ar,BINS=bins) INPUT: dat: structure, 3d data structure filled by get_eesa_surv, get_eesa_burst, etc. KEYWORDS ENERGY: fltarr(2), optional, min,max energy range for integration ERANGE: fltarr(2), optional, min,max energy bin numbers for integration EBINS: bytarr(na), optional, energy bins array for integration 0,1=exclude,include, na = dat.nenergy ANGLE: fltarr(2,2), optional, angle range for integration theta min,max (0,0),(1,0) -90<theta<90 phi min,max (0,1),(1,1) 0<phi<360 ARANGE: fltarr(2), optional, min,max angle bin numbers for integration BINS: bytarr(nb), optional, angle bins array for integration 0,1=exclude,include, nb = dat.ntheta BINS: bytarr(na,nb), optional, energy/angle bins array for integration 0,1=exclude,include PURPOSE: Returns the temperature, [Tx,Ty,Tz,Tavg], eV NOTES: Function normally called by "get_3dt" or "get_2dt" to generate time series data for "tplot.pro". CREATED BY: J.McFadden 00-2-24 LAST MODIFICATION:
(See projects/themis/spacecraft/particles/ESA/packet/functions/t_3d_new.pro)
FUNCTION: vc_3d_new((dat,ENERGY=en,ERANGE=er,EBINS=ebins,ANGLE=an,ARANGE=ar,BINS=bins) INPUT: dat: structure, 2d data structure filled by get_eesa_surv, get_eesa_burst, etc. KEYWORDS ENERGY: fltarr(2), optional, min,max energy range for integration ERANGE: fltarr(2), optional, min,max energy bin numbers for integration EBINS: bytarr(na), optional, energy bins array for integration 0,1=exclude,include, na = dat.nenergy ANGLE: fltarr(2), optional, min,max pitch angle range for integration ARANGE: fltarr(2), optional, min,max angle bin numbers for integration BINS: bytarr(nb), optional, angle bins array for integration 0,1=exclude,include, nb = dat.ntheta BINS: bytarr(na,nb), optional, energy/angle bins array for integration 0,1=exclude,include PURPOSE: Returns the characteristic velocity, Vc, km/s NOTES: Function calls jo_3d_new.pro and n_3d_new.pro Function normally called by "get_2dt.pro" to generate time series data for "tplot.pro". CREATED BY: J.McFadden 09-06-18 LAST MODIFICATION:
(See projects/themis/spacecraft/particles/ESA/packet/functions/vc_3d_new.pro)
FUNCTION: vpar_3d_new(dat,ENERGY=en,ERANGE=er,EBINS=ebins,ANGLE=an,ARANGE=ar,BINS=bins) INPUT: dat: structure, 3d data structure KEYWORDS ENERGY: fltarr(2), optional, min,max energy range for integration ERANGE: fltarr(2), optional, min,max energy bin numbers for integration EBINS: bytarr(na), optional, energy bins array for integration 0,1=exclude,include, na = dat.nenergy ANGLE: fltarr(2,2), optional, angle range for integration theta min,max (0,0),(1,0) -90<theta<90 phi min,max (0,1),(1,1) 0<phi<360 ARANGE: fltarr(2), optional, min,max angle bin numbers for integration BINS: bytarr(nb), optional, angle bins array for integration 0,1=exclude,include, nb = dat.ntheta BINS: bytarr(na,nb), optional, energy/angle bins array for integration 0,1=exclude,include PURPOSE: Returns Vpar, km/s, corrects for spacecraft potential if dat.sc_pot exists NOTES: Function normally called by "get_3dt" or "get_2dt" to generate time series data for "tplot.pro". CREATED BY: J.McFadden 07-6-05 LAST MODIFICATION:
(See projects/themis/spacecraft/particles/ESA/packet/functions/vpar_3d_new.pro)
FUNCTION: vperp_3d_new(dat,ENERGY=en,ERANGE=er,EBINS=ebins,ANGLE=an,ARANGE=ar,BINS=bins) INPUT: dat: structure, 3d data structure KEYWORDS ENERGY: fltarr(2), optional, min,max energy range for integration ERANGE: fltarr(2), optional, min,max energy bin numbers for integration EBINS: bytarr(na), optional, energy bins array for integration 0,1=exclude,include, na = dat.nenergy ANGLE: fltarr(2,2), optional, angle range for integration theta min,max (0,0),(1,0) -90<theta<90 phi min,max (0,1),(1,1) 0<phi<360 ARANGE: fltarr(2), optional, min,max angle bin numbers for integration BINS: bytarr(nb), optional, angle bins array for integration 0,1=exclude,include, nb = dat.ntheta BINS: bytarr(na,nb), optional, energy/angle bins array for integration 0,1=exclude,include PURPOSE: Returns Vperp, km/s, corrects for spacecraft potential if dat.sc_pot exists NOTES: Function normally called by "get_3dt" or "get_2dt" to generate time series data for "tplot.pro". CREATED BY: J.McFadden 07-6-05 LAST MODIFICATION:
(See projects/themis/spacecraft/particles/ESA/packet/functions/vperp_3d_new.pro)
FUNCTION: vxb_3d_new(dat,ENERGY=en,ERANGE=er,EBINS=ebins,ANGLE=an,ARANGE=ar,BINS=bins) INPUT: dat: structure, 3d data structure KEYWORDS ENERGY: fltarr(2), optional, min,max energy range for integration ERANGE: fltarr(2), optional, min,max energy bin numbers for integration EBINS: bytarr(na), optional, energy bins array for integration 0,1=exclude,include, na = dat.nenergy ANGLE: fltarr(2,2), optional, angle range for integration theta min,max (0,0),(1,0) -90<theta<90 phi min,max (0,1),(1,1) 0<phi<360 ARANGE: fltarr(2), optional, min,max angle bin numbers for integration BINS: bytarr(nb), optional, angle bins array for integration 0,1=exclude,include, nb = dat.ntheta BINS: bytarr(na,nb), optional, energy/angle bins array for integration 0,1=exclude,include PURPOSE: Returns VxB, mV/m, corrects for spacecraft potential if dat.sc_pot exists NOTES: Function normally called by "get_3dt" or "get_2dt" to generate time series data for "tplot.pro". CREATED BY: J.McFadden 07-4-29 LAST MODIFICATION:
(See projects/themis/spacecraft/particles/ESA/packet/functions/vxb_3d_new.pro)
FUNCTION: v_3d_new(dat,ENERGY=en,ERANGE=er,EBINS=ebins,ANGLE=an,ARANGE=ar,BINS=bins) INPUT: dat: structure, 2d data structure filled by get_eesa_surv, get_eesa_burst, etc. KEYWORDS ENERGY: fltarr(2), optional, min,max energy range for integration ERANGE: fltarr(2), optional, min,max energy bin numbers for integration EBINS: bytarr(na), optional, energy bins array for integration 0,1=exclude,include, na = dat.nenergy ANGLE: fltarr(2,2), optional, angle range for integration theta min,max (0,0),(1,0) -90<theta<90 phi min,max (0,1),(1,1) 0<phi<360 ARANGE: fltarr(2), optional, min,max angle bin numbers for integration BINS: bytarr(nb), optional, angle bins array for integration 0,1=exclude,include, nb = dat.ntheta BINS: bytarr(na,nb), optional, energy/angle bins array for integration 0,1=exclude,include PURPOSE: Returns the velocity, [Vx,Vy,Vz], km/s NOTES: Function normally called by "get_3dt" or "get_2dt" to generate time series data for "tplot.pro". CREATED BY: J.McFadden 02-8-28 LAST MODIFICATION:
(See projects/themis/spacecraft/particles/ESA/packet/functions/v_3d_new.pro)